Where do you add freon to a 1999 Chevy S-10?
You can add Freon to your 1999 Chevrolet S 10 pickup truck cooling system, through the air conditioning compressor ports. The ports are located on the top of the compressor.
You would add r134 refrigerant through the low pressure port located on the accumulator/dryer.
The 1999 Oldsmobile Alero does not have Freon in the A/C system. It contains R134 and not Freon which is R12. As I am sure you do not have the proper equipment to recharge the system plus the fact it is illegal to add refrigerant to a system with a leak, until the leak is repaired, take it to a professional and have the leak repaired. You have a leak or you would not need…
The 1998 Chevy did not come with Freon (R12) installed. Freon was banned beginning in 1996. It contains R-134. You have a leak that needs repairing before adding more refrigerant. It is illegal to add refrigerant to a system with a leak. Seek out professional help to repair the leak. The 1998 Chevy did not come with Freon (R12) installed. Freon was banned beginning in 1996. It contains R-134. You have a leak that needs…
My 1995 S10 uses r134a. The label on the compressor top will verify this. The low pressure valve you will add refrigerant through is on the accumulator. Hope that helps. Or the low pressure port is on the output evaporator line on a 4 cylinder engine, not the accumulator like the V6. It should have a blue cap, the high pressure which is on the intake line to the evaporator should have a red cap.
First off, the refrigerant is not Freon, it is R134. If it needs refrigerant, then you have a leak. It is illegal to add refrigerant to a system without repairing the leak. You also more than likely do not have the specialized tools necessary to repair or to charge the system correctly. Take it to a professional.
Never add freon to your own car. This is very dangerous and can kill you. A/C systems are very high pressure and If you buy a freon kit to add freon to your car. It will be propane which is highly flammable. Take it to a dealer to get it done. Also if you ever add it and it is leaking out then it can explode if it gets near a spark.
What is the location of the low pressure valve for the air conditionair for a 1991 gmc safari van to add freon?
You add Freon on the low side with the motor running. The low side connection port for freon is much smaller in size compaired to the high side, so you can't put it in on the high side. If you are a novis at this, I suggest you buy the charge kit with a gage so you don't over fill the system,(if you over fill it it won't work properly)