You don't bleed Power Steering fluid. Raise the front of the car, start the engine, turn the steering wheel lock-to-lock 3 times to get the air out of the system. Make sure to use axle stands and block the wheels so you can do this safely.
no
shoot it
Power steering fluid? loosen fill cap turn wheels lock-to-lock 6-10 times check fluid level secure cap
It means that you have air in the steering rack. You need to bleed it properly.
how do I bleed my power steering pete thank you
It doesn't have a bleed valve for the power steering.
power steering fluid is fluid that makes the power steering pump work and it goes in the power steering pump under the hood.
The power steering fluid recommended is Mopar
Remove the plug on the bottom of the power steering fluid pump. Drain the power steering fluid out. Replace the plug to the bottom of the power steering pump. Replace the power steering fluid.
Power steering fluidPower steering fluid
power steering fluid grade
Try draining the old power steering fluid using a small suction device and refill it with fresh fluid. Then bleed the air out by turning the wheel back and forth several times with the car off. If that does not fix it, a new power steering pump is probably needed.