1. Lift the bonnet
2. Locate the brake fluid cylinder its the big round thing with a white lid on it.
3. Behind this there is a smaller cylinder with a white lid about 2inches diameter.
4. This is the clutch fluid cylinder and this is where you pour the clutch fluid.
5. Don't get fluid on the bodywork or you will damage the paintwork
You put brake fluid for the clutch master cylinder
The clutch and brake share the same fluid
There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder
in the clutch master cylinder
your clutch run's of off your brake fluid the place where you put your brake fluid in to fill it up there is a hose the run's from it. it goes to your clutch master cylinder
Astras usually share brake fluid with the clutch fluid resiviour
The fluid used for the hydraulic clutch is DOT 3 brake fluid
DOT Brake Fluid.
On a 2006 Ford Escape : The brake fluid reservoir is also the clutch fluid reservoir
MK1 Punto's do not have clutch fluid... Unlike BMWs, Punto's clutch is controlled via cable...
It uses brake fluid in the brake fluid reservoir. The clutch fluid (brake fluid) is fed by the brake fluid reservoir. The clutch fluid reservoir is just beneath the brake fluid reservoir. So, add fluid to the brake fluid reservoir to fill the clutch fluid, also.
In the clutch fluid reservoir located under the hood, on the drivers side firewall.