( # 27 ) is a 15 amp fuse for the cigarette lighter in a 1997 Mercury Mystique ( under the dash )
how to change a valve cover gasket on a 97 mercury grand marquis ?
I believe it is only accessible by taking apart the transmission in the Mystique.
In the rear left corner of the valve cover.
you need to get them down at 95 ft pounds every other
The reset button for the fuel pump is in the drivers footwell , behind the kick panel ( there is an access hole )
Doesn't have one, that is a Ford/Mercury thing.
A 97 Mercury Villager should use r134a type freon. The valve size is designed so that the r12 fittings cant accidentally be used.
get the keys from cructhfield
where is the PCM located on Mercury Villager 97
It's located on the back side of the intake manifold. It's screwed into the manifold.
My '97 Mystique 4 cyl calls for 5W-30 oil. Check the owners manual, if you don't have it, google for it. As for brand, I use Pennzoil, but it's all pretty much the same.
There isn't one. The engine sits below the radiator, one is not needed.
How to install valve cover to a 97 Nissan maxima.
If the starter spins but won't engage, then the Bendix is not engaging the flywheel. Remove the starter and test to see if the Bendix thrusts out, and check to see that the flywheel does not have chipped teeth.
Pump, fuse, or fuel pump relay.
The PCV valve is located on the top of the 97 5.0 Ford v8. It is near the firewall at the middle of the engine from side to side.
The 97 Honda VTec PCV valve should be on the valve cover. The valve is a plug-in type and just pulls free.
Idle Air Control Valve
What the heck.
The coolant temperature sending unit on a 97 Mercury Sable is in the engine compartment. It is located on the intake manifold.
need timing marks for 97 mercury tracer