It is under the seat, there is a cover directly in the middle.
How do you tighten chain on 1995 kawasaki ninja zx6r
Check the battery cables to make sure they are fully connected. If that does not allow starting, the cylinders may need to be re-shimmed.
check in-line fuel filter.
$31.50 per year registration. If you're just buying it, you'll also pay 7% sales tax on the purchase price plus a title fee...probably around $20
To my knoledge Kawasaki does not make a 1100CC motorcycle however Honda does and i found the information for this if its any help. i also included some Kawasaki bikes around that size. *Honda CBR1100XX (Blackbird) (1100cc) 114 kW (153 hp) @ 10,000 rpm *Kawasaki Ninja ZX-12R (1200cc) 178 hp at standstill and 190 hp at 300 km/h *Kawasaki Ninja ZX9-R (900cc) 128 hp (2000 model) Hope this was heplfull, Beathalor kawasaki made the zx11 in the early nintys, i have an 89 zx10 it makes 137hp at 10,000rpm. i would think the zx 11 is in the 150hp range.
use a one man bleeder
152 keihin main jet or 140 dj main jet if bike is lightly modded (k&n air filter and aftermarket exhaust). needle jet shimmed. A 4 degree ignition advancer would be helpful as well. Maybe some ngk cr9e-k spark plugs ( multi ground plug)
You will have to remove the top fairing as the headlight i believe is bolted onto it. Remove side panels, securing bolts on the frame, and the wiring loom to the top fairing. Just take it slow and dont pull too hard and it will come off fine. I had the ZZR1100 which i think is the European version of the zx11. I replaced my headlight and top fairing without too much problems.
pull a spark plug one at a time . leave it attached to the plug wire and hold the plug right next to the frame or something that will make a good ground. be sure and hold the spark plug wire boot and not the plug itself or youll get a shock you wont soon forget. i even use pliers myself. as the plug is grounded to the frame crank the engine and look for a bright blue spark . if you have spark your coils are working . no spark could be coils, plug wires, etc