It's the plug that is in the middle of a triangular plate. Don't unscrew the other similar-sized bolt because that's what I did and now I don't know which bit to put back first.
The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
it is the only one on the oil pan.
remove the drain plug between the exhaust under the motor
Remove the Suzuki 450 oil pan plug. Allow the oil to drain out of the oil pan. Replace the plug to the oil pan. Fill the motor with oil.
17mm
its under the engine
In order to change the motor oil on a Honda XRM 125 you need to lift the bike on a motorcycle rack. You then need to unscrew the drain plug, let the oil drain out, put the drain plug back in, change the oil and put new oil in.
It is the plug with the number 4 written on on the very bottom of the crankcase.
It will be stamped on the case next to the filler plug.
The transmission fill plug on a 2000 Suzuki Alto is behind the drain plug. Both the plugs are located underneath the transmission.
jack the back of the bike up and remove the oil plug!
Bottom of Oil Pan.Cheers Joseph