Top Answer
User Avatar
Wiki User
Answered 2011-01-16 10:07:26

it is present on the case of relay of Ford..


Related Questions

where is the valve located on the 2002 ranger 4.0 liter 6 cyl?

The pump is electric and is located in the fuel tank.

the slave cylander is located in the transmission on the 2002 Ford Ranger. Better see a mechanic to do the job.

The 2002 Ford Ranger camshaft position sensor is located on the back of the camshaft. The rear engine plate will need to be removed in order to view the sensor.

On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.

i have one of the 2002 models. it is stamped in the frame on the left hand side. Turn the wheels to the right and look at the angle in the frame it is stamped near the top of the frame

The firing order for a 2002 ford ranger is 1-3-4-2. The number one cylinder is at the front of the engine.

Fuse #17 controls the power to power windows on a 2002 Ford Ranger. The fuse is located under the dash on the driver's side of the car.

( fuse # 1 ) is a 5 amp fuse for the power mirror switch on a 2002 Ford Ranger

follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to

Check under the truck about in line with the seat . You may need special tools to change it. the fuel pump for a 2002 ranger is located in the gas tank. pulling the bed off is easier than dropping the tank for this repair

install ignition 2002 ford ranger directions

According to the 2002 Ford Ranger owners manual , the inertia switch ( fuel pump shut off switch ) is located in the front passenger footwell by the kick panel

The firing order for a 2002 Ford Ranger B2300 with a 2.3 engine is 1, 3, 4, 2. The number one cylinder is on the end next to the pulley.

how do you change motor mount on 2002 ford ranger

On a 2002 Ford Ranger , 4.0 liter V6 engine ( and the 3.0 ) firewall 3 - 6 2 - 5 1 - 4 front of vehicle

in the fuse box, its numbered 22 and is a 15 mp fuse

.044 inch for the 3.0 liter in a 2002 Ford Ranger

Take your 2002 Ford Ranger to the garage to get the engine checked.

( 4 ) for the 2002 Ford Ranger 2.3 L - DOHC engine

What is PO 306 in my 2002 Ford Ranger V6 3.0L

The 2.3 liter DOHC engine in a 2002 Ford Ranger has a TIMING CHAIN

Motorcraft BXT - 59 ( is Fords " top of the line " battery for a 2002 Ford Ranger )

The minimum thickness number should be cast into the rotor.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.