I have a 1994 ford aspire, just cleaned the EGR valve last week. it is located just to the left of the #1 fuel injector and the passenger side of the fuel rail.
The MAP/Boost Sensor of a Cat C7 engine is located on the driver's side of the engine near the back side. It is next to the valve cover in the intake manifold.
There is no EGR valve on an Aspire.
the egr valve is located on the back left side of the engine. getting to it is easier from underneath the car. (up on jacks). I had the same thing on a 96 mx-6. we canged the egr boost solinoid sensor located on the air intake box
The turbo blow off valve works by:If the throttle returns to idle while at high boost the valve opens and relives the pressure preventing turbo damage and speeding boost recovery time.This is done by use of a over pressure sensorOr by use of a throttle position and boost pressure sensor working together.
There is no MAP sensor on a 1999-2000 Mazda Miatas. There is a boost sensor that assists with controlling the EGR Valve solenoid and a few other features, and is located on the passenger side on the lower part of the intake manifold, and says "Boost Sensor" on it. The primary sensor for monitoring incoming air and fueling is done by the Mass Air Flow sensor (MAF), not MAP (like Hondas). This is located on top of the stock air box and is a black, cylindrical tube about 6" long.
Idle air control valve sensor is located around the carburetor .
where is the evap purge valve located in a 1996 jimmy
there are two a turbine speed sensor and an output speed sensor both are located above the valve body.
The Chrysler Sebring knock sensor is located in the engine valve or cylinder located at the back of the motor. This part is in this position next to the engine valve so the sensor can feel the vibration of the engine.
The PCV valve is located under the MAP sensor on a 1990 Pontiac Grand Prix. The MAP sensor is in the upper plenum.
The knock sensor for the 1993 Chevy Cavalier is located in the back of the motor. It can also be located in the engine valve.
The cam sensor is located on the left side of the engine (as your looking at it) on the valve cover
The camshaft sensor is located on the drivers side top of engine at the end of the valve cover.
The camshaft sensor is located on the right hand side of the valve cover right below the valve breather tube. It is a simple 2 bolt mount....
its located in valve body
The 2001 Infinity intake valve timing control position sensor is located on the back and of the head. The sensor should be labeled as such.
You can find the PCV valve beneath the MAP sensor located in the plenum at the right front of the engine.
The sensor is part of the tire valve stem.
The cam sensor is located on the left side of the engine (as your looking at it) on the valve cover. It is the only sensor that is located on that side on the upper part of the engine.
In the valve stems
It is on the inside of the valve stem.
the TPS is located directly under the Idle Air control valve (IAC valve) located on the throttle body
There is no pressure sensor. The EGR valve is located on the head next to the battery. Cleaning it is usuallu the first step if there are any SES codes associated with the valve.