I am getting ready to replace the EGR valve on my 1995 Mazda millenia. It is located at the back of the engine in the center at the top. It bolts on with 3 bolts. It will be a triangle shape. You will have to have a mirror to see it well. Any auto parts store should be able to show you exactly where it is.
Change the PCV valve located on the valve cover
yes heads need to be removed
is located in the back of intake, aorund the middle of it close to firewall
The EGR valve is connected above the water hose on the 2002 Mazda Millennia. The EGR valve is responsible for lowering the temperature of the fuel.
Hi there - I just found out yesterday that the thermostat on the 1995 Millenia - 6 valve engine is located on the right/front of the engine block just behind the distributor. Looks like fun. NOT. Good luck!
Where is the EGR Valve on a 1996 Mazda Protege located at?
Where is the PCV Valve on a Mazda B2300 2003
where is the EGR valve on a 1989 mazda b2200
how much does it cost to replace to egr valve on the 2002 mazda protege
There is no egr valve on a 1990 Mazda MPV 6 cylinder
The EGR valve is located at the right rear corner of the intake manifold, near the firewall. before unbolting the EGR valve, disconnect the vacuum line. - Mazda Repair Manual
On a 2001 b2300 it is located above the transmission and you have to take part of the transmission out to get to it. It cost me 538.00 at the Mazda dealer!!!!!!!!!!!!!!!
How replace the EGR valve on a 2004 Mazda MPV? I have been trying to replace the EGR valve of a 2004 Mazda MPV and I have not been able to loosen the nut. The nut is located in the rear side of the valve whish but is extremely stuck and I have been using different tools without any success, it won't even loosen just a bit, even using W-40. Can somebody help me with this case as soon as possible, or a way to clean it without having to replaced it or take it out.
It could be your PCV valve, as this valve regulates how much pressure there is in the crankcase. If your car smokes with a blue color it could be blow by from the rings.
The PCV valve on a Mazda 6 V6 is located on the valve cover near the back of the engine. The PCV valve is usually a plastic or metal part that looks like a small tube sticking up out of the valve cover.
The PCV valve is located on the passenger side valve cover, towards the front of the car, which should have a small rubber hose coming off of it.
# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover
The PCV valve for a 1999 Regal 3.8 is located on the top of the valve cover. The valve pulls out to replace it.
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
behind the engine on the firewall
Under the intake manifold.
what is the valve clearance for the mazda b2500 engine
Replace the PCV Valve.