EGR Systems
Honda Prelude
Honda Prelude SI

Where is the EGR valve located on a 1998 Honda Prelude?

8910

Top Answer
User Avatar
Wiki User
Answered
2011-09-13 10:40:59
2011-09-13 10:40:59

If it is a v6, it is located next to the distributor. Facing the engine it is on the right side of fuel injectors just under injector cover. You can see it from the drivers side.

Another Location in 1998 Honda preludes for the EGR (at least in mine) is at the top left of the engine block, just behind it. Here's a crude Diagram.

........................Big Silver intake valve here

EGR here

__________________

| .................................|

| Engine block ............|

| .................................|

Why you would want to know is beyond me. I personally disconnected mine and plugged the hose leading out from it, bypassing it completely and making my engine run better.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Does a 1998 Honda prelude have a clutch cable

What is the eaziest way to replace an altanator on a 1998 Prelude SH?

The PVC valve is located at the tip of the small hose plugged into the top of your valve cover. It is located between the manifold and the top valve cover.

pcv valve replace every 30000 miles.. bad oil pan gasket, or valve cover gasket

The expansion valve, on your 1998 Honda Accord, is located just before the thermostat housing. You can follow the water hose from the radiator to the expansion valve.

How much is it to replace thehead gasket on a honda accord 1998?

They didn't make and Si in 1998. The PCV valve is on 1998 Civic SI's are located on the bottom of the intake manifold. It is acessed from the bottom of the car, you have to remove the oil filter to reach it.

There are tons of websites out there that can help you with this. Here is one http://www.gripmotorsports.com/dl~pns~Prelude-Honda-1.html

Needs more explanation on what you mean by "scan".

You can try this method thanks to the video below...

The throttle body diagram for the 1988 Honda Prelude is found in the maintenance manual of this car. It can be obtained as a print out from an automotive store as well.

Any cars that have a 5x114.3 bolt pattern.

My 1998 Civic EX engine (CA emissions) vents the upper valve cover into the air intake for combustion. I could not locate a traditional Positive Crankcase Ventilation (PVC) valve on my vehicle.

The 1998 Honda Prelude came in six colors. They were Nordic Mist Metallic, Eucalyptus Green Pearl, Flamenco Black Pearl, White Diamond Pearl, Midnight Purple Pearl, and San Marino Red.

were is the egr valve located on a 1998 infiniti i30

where is egr valve on 1998 ford contour

on a 1998 Pontiac gan am ,they do not have a pcv valve.

if you are in the U.K. £1200 + vat hope its worth it

On a 1998 Ford Explorer, the EGR valve is located on the intake manifold. It is behind the throttle body.

The pcv valve is located under the intake manifold. By folowing the hose out of the top side of the said maniforld it runs directly into the valve. By removing the oil filter one can remove the old valve by prying and twisting it out.

# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover

A 1998 Jeep Wrangler does not have EGR.

I think you mean hydraulic clutch. I believe your model is hydraulic.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.