The PCV valve on a 1993 F150 is located in the top of the valve cover. it is a plug in type, and is easily replaceable.
pass.side valve cover at the rear
5.0L-The valve is located on top of the block by the firewall 2.3L-The valve is mounted inline with the breather hose
Replace the PCV Valve.
Take it to a professional oil-change business and have them do it for around $15.00 or it is located on the driver's side rear of the engine valve cover. It has a rubber hose attached and simply pulls out to replace. Very simple to do.
its the hose coming off of the valve cover that's the egr valve
The PCV valve is located on the back side valve cover. It should be a plug in type and easy to change.
Should be at the front of the motor under the air breather on your intake.
The 1993 Ford escort did not come with an EGR valve. It is one of a few year models that do not have one.
located in the top of the drivers side valve cover between the front and mibble coil.
Replace valve seal
Need more info. Which valve are you referring too?
The idle is controls ONLY by the PCM. Replace your ECTS along with cleaning the Idle Air Control valve located on the throttle body.
On a 1993 Buick Regal 3.1L, the PCV valve is located on the intake manifold. It is situated underneath the MAP sensor.
An idle air control valve is generally located on top of the throttle body, under the hood. Often, these valves need to be cleaned rather than replaced.
The bleed valve is located on the drivers side of the bell housing.
Back left corner of valve cover on 2.0L engines. it is screwed in.
Horn valve? Please give more info.
The At modulator valve is located on the side of the transmission between the transmission tunnel. you may have to lower transmission to get to it.
There are 2 locations- for the 1.8L, the pcv valve is located on the valave cover; on 1.9L and 2.0L engines, the pcv valve is located on the crankcase vent, which is located on the left-hand of the ignition coil module.
pcv valves are always located on valve covers (but not all vehicles have pcv valves)
passinger side back corner of valve cover
with difficulty :P