Crankcases and PCV Valves
Hyundai Accent
Hyundai Elantra

Where is the PCV valve for a Hyundai accent 16 liter?

303132

Top Answer
User Avatar
Wiki User
Answered
2005-10-14 22:03:32
2005-10-14 22:03:32

your pcv valve is directly in front of the intake manifold silver unit that goes between the intake manifold and the throttle body it will have a connector coming from it. what this does it stops the engine from stalling and balances the idle. so as long as the check engine light is not on dont worry about it.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Click on the link to your right for the answer.

There is no PCV valve on the 2.2 Liter engine.

It's a small valve located between the top of the valve cover & the air intake connected by a rubber hose!!

# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover

where is pvc valve located on 2003 hyundai elantra

where is the pcv valve on a 1992 f150 with 5.0 liter

The PCV valve is located in the valve cover.

On one side of the intake manifold, touching the cable tubing going to the right wiper motor.

The 1995 Ford Ranger 3.0 liter engine PCV valve can be found on the top of the engine. The PCV valve will be on the back side of the air cleaner.

The PCV valve on a 2002 Chevy Suburban 6.0 liter engine is located in the engine. You cannot miss the valve.

The PCV valve on the 4 cylinders is typically located on the back of the valve cover to the right, near the intake. Hyundai has the service manuals on line see related link below.

I would say that my 1998 S-10 does not have a PCV valve, at all, anywhere.

The PCV valve on a 2002 Volkswagen Jetta 2.0 liter is located on the end of the rocker arm cover. It has one hose attached to it.

Yes. The PCV valve is attached to the intake by a hose and is located in the valve cover and held by a plastic retainer. Use a pair of pliers to loosen the PCV valve retainer. Unthread the retainer from the valve cover to expose the PCV valve. Pull the PCV valve from the valve cover grommet and remove the valve from the hose.

The PCV valve, on your Ford Ranger 2.5 liter engine, is located on the outside of the air cleaner housing. The valve is on the back of the housing.

On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.

The 1999 Chevy Geo Metro 1.0 liter engine PCV valve can be found on top of the engine. The PCV valve will be behind the air cleaner housing.

Remove the vacuum hose from your 1989 Oldsmobile 3.8 liter engine PCV valve. Remove the retaining bolts from the valve. Reverse the process to install the new PCV valve.

PCV valve on top of the valve cover towards the end of the cover. Will have a 90 degree black rubber boot on it.

The PCV valve, on your Nissan 3.3 liter, is located on the side of the air filter housing. The valve should be labeled for easy identification.

does not have a pcv valve just breather hose from valve cover to intake

its on the intake manifold one right side of air cleaner it is a heated pcv valve it has wires goin to it

Hey Vince==It is in the valve cover. GoodluckJoe


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.