answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2007-07-25 01:11:20

I know on my 91 2.3 it is located at the rear of the engine almost underneath the EGR Valve, just feel around and you'll feel the hose, pull the hose apart at the valve.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions



The blower resistor assembly is located on the heater case to the right of the bloser motor. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups



The blower resistor assembly is located on the heater case to the right of the blower motor. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups


The blower resistor assembly is located under the hood, on the heater case to the right of the blower motor. Haynes Manual #36071


Manual transmission lubricant type: MERCON autmatic transmission fluid - Haynes Manual #36071, 1993-2005 Ford Ranger Pick-ups.


On Ranger models 1994 and earlier, the fuel pump switch is located directly behind the glove box. On 1995 and later models, the switch is located behind the passenger's side kick panel. - Haynes Repair Manual #3601,1993-2005 Ford Ranger Pickups.


According to Haynes Repair Manual #36071, 1993-2005 Ford Ranger pickups, all models: Manual transmission fluid type is MERCON automatic transmission fluid.


Per Haynes Repair Manual #36071: The switch is screwed into an oil filter adapter located at the oil filter.


Manual transmission fluid type ....... MERCON automatic transmission fluid. - Haynes Manual #36071 - 1993-2005 Ford Ranger Pick-ups.



On 3.0L and 4.0L engines, the PCV valve is mounted in the valve cover near the brake booster. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups, all models.


The Mass Airflow sensor (MAF) is located between the air filter housing and the air intake duct. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups.


the PCV is mounted in the oil separator on the left side of the engine


The turn signal/hazard flasher is located under the instrument panel to the right of the steering column. Remove the flashe by pulling straight out. - Haynes Manual #36071, 1993-2005 Ford Ranger Pick-ups.


My Haynes manual says: 1. Clutch not releasing completely 2. Loose, damaged or out-of-adjustment shift linkage



just checked my ranger repair manual, this repair has some procedures that have to followed, would recommend purchasing the Haynes repair manual for that model year it covers both 4&6 cylinder engines


Manual transmission lubricant type: MERCON automatic transmission fluid. Capacity: 2.8 quarts. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups


Every 12,000 miles or 12 months, whichever comes first: Check/replenish the manual transmission lubricant. - Haynes Manual #36071


1993-2005 Ford Ranger V6 3.0L engines are equipped with a timing chain. - Haynes Repair Manual #36071


56 to 72 psi - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups, all models.


Buy a Haynes or a Chilton manual. They will have all the wiring daigrams that you will need.


Get a haynes manual... That'll break it down barney style for you.


My Chilton repair manual shows code P0402 as EGR flow at idle fault and my Haynes repair manual shows code P0402 as EGR excessive flow detected



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.