no one is sure about that question but i have been looking for mine for awhile...the only answer is you can get the hanes manual..or just ask a mech. at a not very busy shop, or go to the local college or university with automotive department and ask them...good luck
Well i don't know exactally what it is called but i know where it is at. If u are looking at the engine the injector cover ( iguess that's what it is called) on the far left side the is like a hose with a clamp on it that is where the pcv valve goes be careful removing now to crack the hose.
typically in the valve cover.
The PCV valve is located in the back of the lower intake manifold. It should have a 3/8" hose going from the PCV valve to a vacuum source on the upper intake manifold.
In the middle of the valve cover nearest the firewall.
The PCV valve is located on the backside valve cover, its towards the drivers side of the valve cover, tough to get at not much room, just changed mine.
you can see the valve on the fuel injector. it is on the passenger side of the car and to the front of the injector.
where is the pcv valve on a 1992 f150 with 5.0 liter
The PCV valve is located in the valve cover
the pcv is located under the fuel injection plenum, towards the back of the engine as opposed to some newer models that have this valve located in the front of the engine on the valve cover
It is at the top of the valve cover. Hope that heps!
the pcv valve is located on top of the valve cover
If you have a 3.3L the PVC valve is located under the alternator.
Passinger side valve cover.
The PCV valve is located on top of the valve cover in the middle.
The PCV valve on 1992 ford mustang 5.0 is on the drivers side.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
The PCV valve on a 1992 Chevy 1500 350 is located on the intake manifold which is on the passenger side of the vehicle and to the right of the throttle. It has two bolts that hold it in place.
It is screwed into the intake manifold between the throttle body and the valve cover
it actually goes right into the top of the valve cover, its L shaped
where is the pcv valve located on a 2003 Nissan sentra
where is the pcv valve located on zuzuki esteem 2001
The pcv valve is on the passenger side valve cover
The PCV valve is located in the rear valve cover,just behind the throttle body
On V6 models the PCV valve is located on the back side of the left valve cover. On V8 models the PCV valve is located on the top of the left valve cover.
the pcv is located on the passenger side middle of the intake there is a hose making a 3 inch u turn the valve is on one end or the other, the egr is at the back center under the intake.