On the V-6 model, the PCV valve is a real pain to replace on this motor. The valve itself is located on the rear valve cover. Getting it off is a pain cause its such a tight area, and because the hoses are usually very brittle, and break. If this happens, you have to take off the upper intake plenum to replace the hose. This in itself can be a pain cause of the hard plastic vacume lines that are located around it. As much as you want to do it yourself, I almost recomend taking to a dealer for this. That way if they break it, they pay for it. Unless you are mechanicaly inclined anyways.
The PCV valve on a 1987 - 1990 Chevy Celebrity is in the top center of the valve cover nearest the firewall.
The PCV sits in a rubber grommet in the top of the valve cover.
The PVC valve is in the valve cover.
Its on the upper engine in front of the valve cover
When you shake the PCV valve it should rattle. If it does not rattle then it is probably stuck and should be replaced.
I am presuming you mean the pcv valve, it is in the valve cover.
The pcv is located on either valve cover or the intake.
Pass side valve cover.
The PCV valve is on top of the rear valve cover. The air intake plenum extends over the top of the valve making it difficult to see.
The PCV valve is stuck in the valve cover on the passenger-side of the car. It just pulls up and out to change it.
where is the PCV valve located on a 2004 chevy tahoe
All engines have a PCV valve.
4 cylinder does not have pcv valve.
The PCV valve is found in the valve cover on the passenger side.
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
The 06 silverado 4.3 does not have a PCV valve.
in what location can I find the pcv valve on my 2002 chevy tahoe
On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.
On the valve cover.
the PCV valve is located on the valve cover of a 1991 Regal Custom. It is plugged in and can be easily changed.
The 1999 Chevy Geo Metro 1.0 liter engine PCV valve can be found on top of the engine. The PCV valve will be behind the air cleaner housing.
The PCV valve is located on the top of the valve cover. There will be a large vacuum line connected to it.
Yes, you can clean the PCV valve. Take off the PCV valve and get a spray can of carb cleaner. Just spray into the valve and just enough to clean out any gunk that might be in there. You should hear it rattle when you shake the valve.
in the valve cover
The PCV valve on a 2002 Chevy Suburban 6.0 liter engine is located in the engine. You cannot miss the valve.