Where is the ac control module on a 2000 Mazda Millenia?
it is connected to the back of the push button panel. you have to remove the portion of the dash that the push buttons are in to access the amp. there are 2 screws, one each on either side of the steering column. pop off the black plastic bezels, and pop off the dash lite rheostat. underneath are the screws. then, gently pry off the dash part. i start at the glovebox. you will then have to disconnect the wiring harness' to the a/c amplifier. all the controls/amp are then accessible from the back
on your 2000 Blazer the control module is located under the kick panel on the passenger side. Simply remove the plastic panel, unbolt the module with a 10 MM socket and disconnect the wiring hareness. While your there, check the wiring hareness for corrosion as this is a big problem. apply Dielectric grease to the hareness and install new control module.