On a 1993 Grand Am (and most other GM front drivers) there is no low pressure switch, instead it has a thermal expansion valve system with a "pressure transducer" located on the high pressure hose. The pressure transducer sends a square wave digital signal to the PCM, which can calculate high side pressure in PSI through a mathematical formula, which in turn sends a signal to the a/c compressor clutch relay to turn on if the pressure is within the set parameters. The a/c pressure transducer cannot be checked with a test light or such, you WILL short the computer if you try!!
Pontiac Grand ams dont have an inertia switch, actually no GM cars that i know of have them.
It is located behind where the power steering fluid is on the drivers side of the engine.
it is located on the steering column
Where would I finf the relay switch on a 96 Grand Am?.
I called Pontiac there is no cfuel cut off switch.
How to change oil pressure sensor on 3.4 sfi
the oil pressure switch is a 1 wire plug usually located on the engine block itself it could be on the side on the rear on the front under the motor on top
Next to the oil filter
Yes. It's located on bottom left side of air filter box.
It is located on the pressure line.
If it is not visible at the door jamb, it is probably located in the latch mechanism
The low pressure line located on the firewall.