answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2012-08-09 21:50:52

It is located behing the front bumber, attached to the bottom center of the radiator.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


It is behind the front bumper fascia, clipped on the bottom of the ac condenser.


The ambient air temperature sensor, on your Nissan automobile, is located in the drivers side mirror. The sensor is on the bottom of the mirror.


The ambient temperature sensor is located behind the front grill.


The airflow ambient temperature sensor is located on the air intake housing. The sensor should be labeled as the airflow ambient temperature sensor.


Should be at the front of the vehicle, usually before the rad, some vehicles the sensor is mounted on the front bumper reinforcement.


It depends on the ambient temperature and pressure of the environment in which the compound is located.


A 2001 Chrysler Town and Country does not have a water control valve in the heater system. The cabin temperature is controlled with electric motors on airflow control doors.


A 2000 Chrysler Town and Country does not have a cabin filter.


It depends on which of them. The one for coolant is located in the water inlet. Ambient temperature sensor is located in the filter box.



Normally on the front bumper or in the front grill somewhere.



The thermostat on a 1997 Chrysler Town and Country is located under the housing where the upper radiator hose attaches to the engine.


A 2000 Chrysler Town and Country does not have a cabin filter.


A 2002 Chrysler Town and Country does not use a mass airflow sensor.


A 2006 Chrysler Town and Country does not have a mass airflow sensor.


All fuses are under the hood next to the battery on a 2003 Chrysler Town and Country.


The intake air temperature sensor is on the tube between the air cleaner and the throttle body.


The external air temperature sensor on a Chrysler PT Cruiser is located in the front of the motor. It is in the air intake tube that goes from the air cleaner to the motor.


The fuse box on a 2010 Chrysler Town and Country is under the hood next to the battery.


The fuse box on a 2010 Chrysler Town and Country is under the hood next to the battery.


A 1996 Chrysler Town and Country has two oxygen sensors. They are screwed into the exhaust on the rear of the engine.


The oxygen sensors on a 1996 Chrysler Town and Country are screwed into the exhaust system behind the engine.


The thermostat on a 2006 Chrysler Town and Country is under the housing where the upper radiator hose attaches to the engine.


It is located on the drivers side of the vehicle in the duct that flows air to your tires



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.