Car Electronics and Lights
Car Stereos and Speakers
VW Polo
Chevy Trailblazer

Where is the best place to fit rear speakers on a 306 estate?

User Avatar
Wiki User
August 18, 2008 11:12PM

I also have a 306 estate and had a similar problem. The rear speakers are mounted in the tail gate and ate 7x5, an awkward size for performance speakers. This leaves you with a few options. 1. Replace the speakers in the tailgate with better ones. 2. Build a box to mount somewhere within the car and mount 6x9s in here. However, I've just done this and decided it takes too much space out the car (whats the point in an estate if you cant use it, gotta get my surfboards in) Besides, youll still need to do the below steps to snip the wires out anyway. 3. Remove the storage at the rear of the boot. Remove the opening flap and take out the inner plastic lining. By taking out the right screws it leaves you with a metal opening. This can easily be sealed by a sheet of 6mm MDF cut to size. You can then mount your speakers in here. You'll need to remove the screws around the facia surrounding the rear windows first, to get to the wires. Wires to cut n shut should be 845 yellow and 846 white passenger side, and 847 white and 848 yellow drivers side. You might want to play arund with connections, I soldered mine in a way that it would be easy to remove/replace speakers. All you gotta do then is wire it up and screw your wooden plates on, hey presto. If anyone wants help or photos, email jcbriley@hotmail.com

Related Questions

User Avatar

to remove the rear speakers you only have to remove the screws securing the cover of the speakers, one of them is located nearby the rear shock cover.

User Avatar

some do have rear speakers but you will have to check it

User Avatar

Attach the wiring harness to the back of the new speakers. Secure the speakers into place with the retaining screws. Put the speaker covers on.

User Avatar

Remove the cover from your 2001 Kia rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new rear speakers.

User Avatar

What is the size of the rear speakers on daewoo lanos

User Avatar

there are NO speakers in the "rear" doors of a Neon.

User Avatar

they dont ship stock with rear speakers.

User Avatar

Begin by removing the covers to your 1993 Geo rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the rear speakers. Reverse the process to install the new rear speakers.

User Avatar

Remove the dash pad, then remove the speakers from the dash frame. For the rear speakers, open the trunk and remove the brackets, that hold the speakers in place. not for the back speakers ..you have to remove the lower rear seat then remove the seat belts then the rear seat back then remove the header panels in the back seat then remove the deck cover ..the rear speakers are bolted in from the top down under the rear deck cover....and the front speakers i believe are mounted in the door panels in the front doors ..you have to remove the door panels to remove them .some do have them in the dash also if they are there u do as the person stated before me.

User Avatar

Attach the wiring harness to the back of your 2002 Chevy new rear speakers. Secure the rear speakers with the retaining screws. Put the rear speaker covers on.

User Avatar

Begin by removing the cover from your rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speaker. The rear speakers will come out.

User Avatar

Connect the external speaker system to the Audio Output on the rear of the iMac. It is the connection on the far left of the rear of the iMac when you are looking at the rear. The speakers will have to be self powered speakers computer speakers.

User Avatar

Remove rear seat, them remove rear deck to get to the speakers.

User Avatar

In the Astra 1600 estate model the audio system has four channels Left Front Right Front Left Rear and Right Rear. Speakers must have an Impedance of 8 ohms. Buy speakers with an Rms wattage of 25 Watts.Rms stands for Root Mean Square Buy full range speakers, the sound quality becomes better. Do not be misled by PMPO ratings.

User Avatar

The rear speakers in a 2001 Mercury Sable measure 6 inches by 8 inches. These speakers are located in the rear deck of the vehicle.

User Avatar

1988 Jaguar XJ6 stats Front Speakers: 3-1/2" Rear Speakers -Rear Door: 4" -Rear Deck: 4"

User Avatar

The ohm rating is 8 ohm on the rear speakers in a Pontiac Sunfire. They can be switched out, as long as the front and rear speakers match.?æ

User Avatar

front door speakers are 6.5 inch (round) with a dome tweeter seperate, and the rear speakers above the rear headrests in the corners are 4x6

User Avatar

door speakers are 6.5" and rear deck speakers are 6"x9" door speakers are 6.5" and rear deck speakers are 6"x9"

User Avatar

First remove the cover for rear deck third brake light. Then lift the front of the rear deck tray above the the top of the rear seat to gain access to the speakers which are held in place with two ten mm bolts each. The speaker leads are soldered to the speakers so you will have to cut them close to the terminals to remove them. Be careful with the rear deck package tray as it is somewhat fragile.

User Avatar

The rear speakers are 6 1/2" as are the front.