The blower resistor on a 1999 Chevy truck Z1500 is located behind the glove compartment. There is also a resistor on the firewall next to the blower motor itself.
In a 1988 Chevy 2500, the blower motor resistor can be found on the passenger side. It usually is behind the glove box.
How do you replace the blower motor on a 1994 chevy lumina euro?
Should be near or attached to the blower motor
Under the hood. In the blower motor harness connector.
Should be behind the glove box. The blower motor speed resistor is located under the hood, on the firewall, passenger side, close to the blower motor.
Try on top of the blower motor behind the glove box
its next to the blower motor behind lower of glove box
If you are referring to the blower motor resistor, it is located behind the glove box and in the heater case.
to the left of the blower motor. It's on the left side of the engine compartment
Its located on the passengers side behind the glove box right next to the blower motor......
it's behind the washer bottle
The blower motor speed resistor is burned out. The resistor is located close to the blower motor and is easy to change. Your local auto parts store will have that part for you.
Its not the relay, it is the blower motor resistor.
I have a 1993 Chevy lumina van that has heat but doesn't have a fan how do I fix the fan?
just in back of glove box,down a little!!!
If you drop the glove box door you can usually see it.
The blower motor relay is located behind the glove box compartment beside the blower motor resistor. When you remove the glove box compartment, just look to the left of the resistor and the relay is located directly beside it with a metal retaining frame holding both the resistor and the relay.
It is located behind the coolant and windshield washer reservoirs. The two wires on the blower motor will lead you to it.
If you do not have fan speeds it may be a fuse or the blower motor resistor. For help with the issue visit our enthusiasts forum at www.trailvoy.com
Under the hood, passengers side firewall, close to the blower motor.
The blower resistor gets overheated and burns out usually because the blower motor is failing also.
Under hood passenger side near fender
it is behind the right plastic panel in the cargo area
In the truck!