Chevy Tahoe
Chevy Trucks and SUVs
Ford Explorer Eddie Bauer
Honda Accord LX

Where is the brake lamp lead for 1999 Chevrolet Tahoe?

616263

Top Answer
User Avatar
Wiki User
2006-03-20 00:18:55
2006-03-20 00:18:55

look under the hood you will see a relay box on the drivers side the brake light fuse is in there i believe.good luck..............

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

it is an indicator. You need to check your brake fluid or your bulb.

User Avatar

If it is not a low fluid condition then you will need to pressure bleed it.

User Avatar

Which brake lamp are you needing to change? Brake/turn signal lamp.

User Avatar

the 1989 Honda accord lxi has a brake lamp light on the dashboard, if the brake lamp light is on, this means you have a brake/tail light out or disconnected

User Avatar

1999 Chevrolet Malibu brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

User Avatar

1999 Chevrolet Prizm brake or tail light bulb lamp replacement procedure: Purchase the correct replacement brake or tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake and tail light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake and tail light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

User Avatar

#1 Fault is a Brake Lamp switch inop. Double check that ALL 3 Lamps Are cycling.

User Avatar

On a 1994 Honda Accord, the brake lamp comes on when a tail light is no longer working. The burned-out bulb needs to be replaced. The brake lamp will not come on after the bulb is replaced.

User Avatar

The stop lamp switch is on a bracket above the brake pedal.The stop lamp switch is on a bracket above the brake pedal.

User Avatar

It means one of the brake lamp bulbs is blown or maybe there's a wiring problem. In any case, your brake lights are not fully functional.

User Avatar

IT USUALLY MEANS LOW BRAKE FLUID. JOSE It means the brake lamp sensor has detected a burned out bulb. This can also happen if you disconnect your high mount brake lamp to connect the circuit to a spoiler mounted brake light without changing the sensor. -- dws

User Avatar

Adjustment need to be backed off by the brake pedal!

User Avatar

You need a blub or your brake fluid is low.

User Avatar

* Take the bulb out and check the number on the bulb itself * Review listing below* Check the Owners Manual for a full listing of all the bulb types on your vehicle Bulb Numbers:* FRONT Turn-signal - 3457 AK (amber) * Headlamp - 9007 QL (9007LL optional) * Tail lamp/brake/turn lamp 3157 * Tail lamp/brake lamp (wagon) 3157 * Rear turn lamp (wagon) 3456K * Backup lamp 921 * Backup lamp (wagon) 3156 * License plate lamp (2) 168 * High-mount brake lamp (2) 912 * Rear side marker lamp (wagon) (2) 168 The above information extracted from the Owners Manuals (see below) See "Related Questions" below for more

User Avatar

it means that you have to check your breaks

User Avatar

Probably either a bad brake lamp switch, improper adjustment of the brake lamp switch or a bad turn signal switch.The brake lamp switch also contains the cruise disconnect switch, but often only the brake lamp portion will fail due to the higher current involved in running the brighter lamps. The switch develops resistance caused by carbon tracking on the contacts from the spark that's created whenever the switch changes states.Also, the brake lamp circuit runs through the turn signal switch. If the brake lamp contact in the switch goes bad, you can have a situation where the brake lamps won't light but the turn signals function properly.

User Avatar

just had oil change on saturday. no problems. now brake lamp light on 2000 honda accord ex

User Avatar

Low brake fluid level or Parking brake not released completely

User Avatar

It means one of your rear brake lights are out. Not the tailights but the brake light(s).

User Avatar

if it isn't a fuse or lamp problem, check the brake lamp switch on the brake pedal, if you unplug the switch, and jumper the connection, and you have brake lamps, replace the switch...

User Avatar

Low brake fluid level - due to leak or worn brake pads Parking brake not fully released

User Avatar

1999 Mercury Cougar brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

User Avatar

the brake lamps, smart one the brake lamps, smart one


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.