It is located under the drive side dash. The brake pedal mechanism presses against the switch when you press on.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
the brake light switch is on the top of the brake pedal arm. under dash.
Chevrolet Blazer parking brake can be adjusted with the adjustment screw on the parking brake pad. The parking brake can also be adjusted with the parking brake cable.
the switch is located at the top back of brake pedal!!
The 1998 Chevrolet Cavalier brake relay switch can be found below the dashboard, on the drivers side of the passenger compartment. The brake switch simply plugs in and out.
While stepping on the brake,wiggle the flasher switch on the column.See if that will make them come on or blink.They have had problems with this switch going bad.It is called a multi-function switch.All brake light,turn signal,etc,goes through this switch.
you can find the switch on the back of the brake pedal.
Usually on the upper end of the brake pedal under dash area
The 2004 Chevrolet blazer emergency brake is equipped with an adjustment bolt. Turn the adjustment bolt to loosen or tighten the emergency brake.
Check the brake switch located on your brake pedal shaft. May have to be replaced.
under the dash ,attached to the brake pedal
DOT 3 Brake Fluid