Inside the distributor.
To change the camshaft positioning sensor on a 98 GMC Jimmy you need to first locate it. The sensor is located within the distributor. Next, unbolt the old sensor and replace with a new sensor.
still waiting on a answer , is it the same as a 2.3?
its located in the distributor at the back of the motor.
Cam position is taken from the distributor. There is no separate cam sensor.
1996 and later models-the camshaft position sensor is located on the back of the distributor, drivers side.the loss of the camshaft position sensor signal will not affect the driveability of the vehicle. whoops,that sensor is located in the distributor,the one on the back is the ignition module.
It's located on the passenger side under the powerstreeing pump
Most Camshaft Positioning Sensors are "Plug and play", if not I do not recommend playing with it if you are unsure have a mechanic do it.
camshaft positioning sencer is located on the front side of the right head as your facing the front of your car it is very easy to get to one bolt holds it on its rite below the valve cover
there are many different things that it could be check the camshaft positioning sensor, the throttle positioning sensor, and the crankshaft positioning sensor.
near the #4 spark plug. 2.0L Engine
where is the camshaft exhaust positioning sensor on the in-line 5 cylinder motor, 2006 hummer h3
The 2003 Mazda camshaft position in sensor can be found on the back of the left-hand cylinder head. The camshaft position sensor should be labeled as such.
on 3.0 and 4.0 its located behind the intake manifold on the top of the cylinder block
---------------------------------------------------------- The camshaft positioning sensor is hidden behind the starter motor on the 3.5 6-cyl. engine. I think it's the same for the 4.0. The starter motor must be removed to replace the sensor.
The Camshaft sensor is located in the distributor.
have never heard of a cam angle sensor. the cam does not change angle.it stays put in the bearings
The camshaft position sensor is located on the end of the camshaft housing, on a 2002 Daewoo. The sensor should be labeled as such.
On a 2004 Chevy Astro, the camshaft sensor is located in the front of the engine. It is on the left side of the timing cover behind the camshaft sensor.
Where is the camshaft position sensor located on 1990 Lexus ls400?
wher is the camshaft sensor for escort2002
the camshaft position sensor is on the left side of the engine , at back on the upper side . you have to demont the conector , than unscrew and replace it
The Camshaft Position Sensor is located behind the Power Steering Pump.
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue