i think u mean crank sensor and that would be by the dampener or balancer in the front of engine (near crankshaft)
The crankshaft position sensor on a 2005 dodge grand caravan is located on the top side of the bell housing.
where are the camshaft position
The crankshaft position sensor on a 1998 3.0 dodge caravan is located on the top of the bellhousing towards the firewall.
where is crankshaft position sensor and camshaft position sensor on a 2004 Jetta 2.0 gl
Answerthe camshaft sensor is the distributor but the crankshaft position sensor is located right next to the crankshaft its held on by one bolt
The camshaft sensor is the same as the crankshaft sensor it is local on the passenger side of the valve cover . And going down to your crankshaft inside the timing belt cover
trany bell housing
The crankshaft position sensor on a 2005 dodge grand caravan is mounted on the upper side of the bell housing and can be easily accessed from the top.
Its situated in the sump of the engine It is on the nose of the crankshaft.
The crankshaft position sensor must be behind the timing belt cover next to the crankshaft and behind the crankshaft pulley. The camshaft position sensor is again under the timing belt cover next to the camshaft and behind and the camshaft pulley. Is it the same place in 2000 Camry 4Cyl? Do you have pictures of the location? Hard or easy to replace, and what tools do I need? Thanks alot
The crankshaft itself has no marks, the crankshaft pulley has one, it's white color. The same is true for the camshaft, it has no marks. But the camshaft pulley has a hole in it. That hole must alighed with the mark behind the pulley and the crankshaft should alighed with its own mark and the camshaft in the same time.
The Crankshaft Sensor is located on the right rear of the engine block. It is about 6 or 7 inches from the flywheel.
Where is the camshaft sensor located in 1997 Chevy venture
No crank sensor, only the sensor in the distributor.
Nope. Rumor is crankshaft (near the bottom of engine) is only used for diagnostics, now camshaft sensors(s), are needed and are located near the top of the engine.
I have a 2003, 4cyl, and its located on driver side, rear side of motor, acutally behind the camshaft.
The sensor is located directly above the crankshaft pulley. The camshaft sensor also connects with the crankshaft position sensor.
Found it at front bottom of engine
Top rear of the bell housing, aims at the flywheel.
The Crank sensor is located on the transmission housing near the top at the back of the engine.
The sensor is down on the front of the oil pan just behind the crankshaft pully, which is located at the front of the engine.
It is located on the transaxle bellhouse) half way between the O2 sensor and the hydro. break pump.
Usually on most Vehicles the Crankshaft Sensor is located Behind the Lower Pulley which is known as the Harmonic Balancer.
opel omega crankshaft sensor is located next tp the oil filter atached with a star shaped screw, to remove it you have to remove the oil filter first. or the muffler.