answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2007-09-18 22:08:46
2007-09-18 22:08:46

Not sure, but I think it should be located on the clutch pedal arm under the dash. Kind of like your brakelight switch.

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Check the park/neutral safety switch, or clutch switch if its a manual.



it is under the dash at the top of the clutch pedal.it is the same as the clutch start switch


You can get a diagram?æ of a clutch?æ for the 1996 Honda Accord from the Owners Manual. If you no longer have an owners manual you can contact Honda and they will send you one.


There is no neutral safety switch it is a clutch position switch ans is loacted in the floor in front of the clutch pedal


on the firewall under the clutch pedal, It is actually a switch


Your local library has repair manuals.


look above the clutch pedal on the inside of the car.


I think it is a clutch operated switch mounted on the clutch pedel up under the dash.


The clutch has an automatic adjuster therefore there is not a provision for a manual adjustment.


You have 2 switches A and B above clutch petal under dash


Inside the manual transmission bellhousing


The wiring diagram on a 1996 Geo Metro is located inside the service manual. It details the location of each electronic component and how they are connected to each other.


On the 1996 Ranger the manual shows to lift the clutch pedal every 5,000 miles to adjust the hydraulic clutch , I don't know if yours is the same


On a 1996 Ranger the manual shows to lift the clutch pedal every 5000 miles to adjust the hydraulic clutch - I have no idea if your's is the same


Inside of the clock or hood text 4434660178 for more


If you are referring to the little springs inside the clutch assembly itself, you don't fix them, you replace the clutch.See:How_do_you_replace_the_clutch_in_a_96_Geo_MetroIf you mean anything else in there with the clutch, see the above anyway, that'll get you inside.


If the clutch switch failed then the car will not start unless the switch is bypassed. The purpose of a clutch safety switch is to prevent the car from dangerously starting, so when it malfunctions that car will not start without it switch off.


most clutches need free play adjustment with manual linkage is next to left side of transmition


Get the manual (now available for 89-97 Metros) and follow the step by step instructions. I'm waiting for the manual to arrive.


you cant edit: In order to start any manual transmission car, the clutch must be fully depressed.


CHECK THE CLUTCH SWITCH TO SEE IF ITS FAULTY. MAKE MAKE A JUMPER WIRE TO SEE IT THAT'S THE PROBLEM. MAKE A JUMPER WIRE WITH AN INLINE 20 AMP FUSE. UNPLUG THE ELECTRICAL CONNECTOR TO THE CLUTCH SAFETY SWITCH. PUT THE JUMPER WIRE IN PLACE OF THE SWITCH. NOW PUT THE CLUTCH IN AND TRY TO START IT,IF IT STARTS THEN BUY A NEW SWITCH. THE CLUTCH SAFETY SWITCH IS UNDER THE DASH ABOVE THE PADDLE,LOOKS LIKE A LITTLE CYLINDER. GOOD LUCK


According to the 1996 Ford F-250 owners manual : The hydraulic clutch takes ( D.O.T. 3 brake fluid , meeting Ford specification ESA-M6C25-A )


your clutch is automatically self adjusting ( according to the 1996 Ford Ranger owners manual )




Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.