You will need to lower the glove compartment, then remove some other parts, but you will see the white box sitting in there. If you don't know the factory code, you can remove the computer and find the code on the top.
The door locks are not computer controlled.
shock absorbers
To remove the upper console in a 2002 sport track, kindly use your manual so that you get everything in order.
Between the engine air filter housing and the big rubber engine air intake tube
Yes, there is an indicator light on the dash.
DOT 3 ( Department Of Transportation 3 )
where are the temp sensors on a 2002 jeep liberty sport located
Behind the blower motor...
The 2002 Mitsubishi Gallant computer is located behind the passenger side dashboard. You will need to remove the glovebox in order to access the computer.
Not from my computer.
Short Track Speed Skating, Snowboarding, and any other sport where an American won gold.
The computer module on the 2002 Explorer Sport is not located in the drivers side rear panel, does anyone know where it is located? On a 2002 Explorer Sport if you are looking for your code or computer then you will have to disconnect the battery and the passenger side airbag cover pull it off and gently remove the airbag by sliding it be careful not to deploy it and there will be the computer directly in front of you the 5 yellow numbers are your key code and this is how you also access the computer, I have a2001 Explorer sport and this is where I found it. Which computer are you looking for? On the 1998 Explorer Sport? The Engine Control Module (ECM) or the Chassis Control Module (CCM) or the Airbag Module (Clock Spring)The answer that the Computer Control Module is under the Steering Column Airbag is the funniest thing I have ever heard. That is the Clock Spring. There is a module under the glove box on the kick panel on the Passenger Side of the 1998 Explorer Sport, behind that plastic molding you see just inside the door on the right-hand floor. It has a plastic clip that holds it in, just reach up to the top of it and tug it out. Be careful, no need to break it but it will come out. In some models it is located behind a metal bracket that holds it in and will need to be unbolted. As with any computer module, Match your S/N with the one you replace it with. We need to know which module is under the plastic cover on the passenger sidewall.