The computer module on the 2002 Explorer Sport is not located in the drivers side rear panel, does anyone know where it is located? On a 2002 Explorer Sport if you are looking for your code or computer then you will have to disconnect the battery and the passenger side airbag cover pull it off and gently remove the airbag by sliding it be careful not to deploy it and there will be the computer directly in front of you the 5 yellow numbers are your key code and this is how you also access the computer, I have a2001 Explorer sport and this is where I found it. Which computer are you looking for? On the 1998 Explorer Sport? The Engine Control Module (ECM) or the Chassis Control Module (CCM) or the Airbag Module (Clock Spring)The answer that the Computer Control Module is under the Steering Column Airbag is the funniest thing I have ever heard. That is the Clock Spring. There is a module under the glove box on the kick panel on the Passenger Side of the 1998 Explorer Sport, behind that plastic molding you see just inside the door on the right-hand floor. It has a plastic clip that holds it in, just reach up to the top of it and tug it out. Be careful, no need to break it but it will come out. In some models it is located behind a metal bracket that holds it in and will need to be unbolted. As with any computer module, Match your S/N with the one you replace it with. We need to know which module is under the plastic cover on the passenger sidewall.
most computer modules are under the dash behind the glove compartment
On my 2001 sport trac it is behjnd the backseat on the module
if you look under the hood faceing the engine it's on the fire wall on the right hand side.
The powertrain control module (PCM) is visible in the engine compartment. It is in the firewall on the passenger side. The rap module for your keyless entry should be in the jack storage compartment ( at least it is on the 4 door)
The powertrain control module (PCM) is visible from the engine compartment on the firewall on the passenger side. The RAP module for your keyless entry should be in the jack storage compartment (at least it is on the 4 door)
The powertrain control module (PCM) is visible from the engine compartment. It is in the firewall on the passenger side. The rap module for your keyless entry should be in your jack storage compartment (at least it is on the 4 door)
On a 2001 Ford Explorer the airbag control module is located behind the passenger side kick panel (located to the right of the passengers right foot if seated in the vehicle).
I have a 2001 Ford Explorer sport trac and the module is located behind the front passengers side panel. I would have to believe that the 2002 Explorer would be the same.
The door locks are not computer controlled.
It is located on the computer module. To get to it is is in the jack storage compartment, and it is located toward the front of the vehicle. There is a white label on one side and thats where the code is printed.
Im not sure if it is different on my XLT but it is located in the rear compartment where the jack is. It is that yellow plastic color. On it is the 5 digit code for the keyless entry. Hope this helps you out.
The 4x4 control module is located behind the kick panel in the passenger side floor board. The module simply unplugs and you plug the new one in.
Where is the cabin filter located on an Ford Explorer Sport Trac 2008?
I found the computer module (w/ the keyless entry factory code) on my 2003 Ford Explorer XLT behind and just below the rear passenger side seatbelt panel. Not sure if it's in the same location on the Sport model but it's worth a shot. Carefully remove the seatbelt panel (shoulder portion) and dislodge the top portion of the panel below it. The black computer module with the keyless entry code should be easily visible.
The factory-set code is located: I have a 2005 ST my code was on the keyless module behind the passenger side air bag. go to www.mysporttrac.com and it will tell u how to find it.
How do I get the 5 digit entry code, just purchased 2007 ford explore sport trac and not on th owners wallet card
AnswerThe powertrain control module is visible from the enginecompartment, it is in the firewall on the passenger side.The RAP module for your keyless entry should be in the jack storagecompartment (at least it is on the 4 door)The powertrain control module is also located behind the passenger side airbag compartment on new models 2000 and up and the 5 yellow numbers on it is also your keyless entry they will not be in the jack compartment on 2000 and up
Were is fuel injector located on a 1999 ford explorer
I have a 2001 sport trac and the codes are printed on the computer which is located behind the passenger side air bag.
The DRL module is located at the left side of the Windshield Washer Reservoir(when facing it).
According to my Haynes repair manual 2001 and later models have a separate control module just for the 4X4 system that is located behind the right front passenger kick panel.
You don't the computer does it.
If you are referring to the PCM ( powertrain control module ) one end of the PCM should be visible from the engine compartment. You will see a wiring harness bolted to the PCM in the firewall on the passenger side
It is located in an 01 in the back panel above the tire jack on a 6' rectangle box with wires coming out of it. You will need to pull back the plastic and look with a light.