I am assuming you mean the PCM(Powertrain Control Module), there are several computers on that vehicle. The PCM is located along the top of the firewall under the hood, just below the center of the cowl. You will see the connector with a 10mm bolthead fastener. Remove the connector by loosening the bolt, and unplug it. Then you will see the end of the module sticking through the firewall, with a plastic bezel held on with two nuts. Remove the nuts, remove the bezel, and slide the PCM out.
The 2007 Ford Explorer computer module is located below the dashboard, on the passenger side. The computer module is in a rectangle steel box.
On a 1994 Ford Explorer, the computer module is behind the kick panel on the passenger front side.
The computer module for the keyless entry system on the 2006 Ford Explorer is behind the rear passenger seat. It is located under the seat belt panel.
The Ford Explorer computer module is located on the firewall under the hood in the center on some models. On other models the computer module is behind the glove compartment. The glove compartment has to be removed (open it as far as possible to pop it off the back hinge) to access the computer module.
The idle is controlled by the powertrain control module ( computer )
where does a shift module go in at on a 1995 ford explorer xlt 4.0 2wd
On a 1999 Explorer there is a 7.5 amp fuse in location # 10 of the fuse panel for the overhead console.
The powertrain control module on 1991 and 1992 Ford Explorer is in the right front passenger area behind the right front kick panel
In the Jack compartment on a 1996
On a 1999 Ford Explorer : You can see one end of the Powertrain Control Module ( PCM ) from the engine compartment . It passes through the firewall and you can see one end where the wiring harness bolts to it . Most of the PCM is " hidden " behind the glovebox area
No , the 1999 Ford Explorer Sport and the 1999 Ford Explorer 4 door have shock absorbers front and rear
where is the horn located on a 1999 ford explorer?
freon for 1999 ford explorer =========================== r134a ( Helpfull )
You can find the module for your 2000 Ford Explorer on the firewall in the engine compartment. The module will be on the drivers side of the firewall.
The security module on 2002 Ford Explorer is on the passenger side, second row behind the seat belt panel.
The idle speed is controlled by the powertrain control module ( computer )
The powertrain control module is visible from the engine compartment. It is in the firewall on the passenger side. The RAP module for your keyless entry/keypad is in the jack storage compartment.
The Ford Explorer relay module layout diagram can be obtained from most Ford dealerships. The relay module layout diagram can also be found at many auto-parts stores.
how do you change a fuel pump on a 1999 ford explorer
Do a Google search - OBD II codes
The 1995 Ford Explorer ECU module can be found on the outside of the air filter housing. The ECU module will be on the back of the housing.
Were is fuel injector located on a 1999 ford explorer
at the left side of rear compartment where the jack is. on the sticker of the the yellow box.
The daytime running light module on a 1996 Ford Explorer can be found behind the bumper. It is on the driver's side of the car.