The GEM module is to the left of the steering column.
The module for keyless entry on a 2000 Ford Taurus is located under the driver side dashboard. It is a small box that controls all the functions of the alarm system.
The computer module for a 2001 Ford Taurus is located just behind the glove compartment. This provides a level of safety for the computer and allows for easy access to the ODBII port.
The Chevrolet dealer resets the computer module for that.
Look to the right of the steering column under the dash. I think the remote keyless entry is here & not sure if it's different from keyless entry.I'm not exactly sure if the computer that controls the keyless entry is what they're looking for - OR - the location of the factory set code for that vehicle.See "Related Questions" below for the location of the code
It is under the dash on the driver's side to the left of the fuses. There are three large gray connectors bolted to it. The keyless entry code will be on the side. Use a small mirror to see it.
In the owners manual there should be a car card the SID card will have the number needed. This can also be found on the inside of the glove compartment.
where on my 2004 freeport can I find the computer module
The keyless entry module, on your Ford automobile, is located in the engine compartment. The module is bolted to the firewall.
The computer module for the keyless entry system on the 2006 Ford Explorer is behind the rear passenger seat. It is located under the seat belt panel.
The ignition switch, also called the wireless control module, is the keyless entry computer and receiver.
The powertrain control module is visible from the engine compartment. It is in the firewall on the passenger side. The RAP module for your keyless entry/keypad is in the jack storage compartment.
In the Jack compartment on a 1996
were is the shift module on a 1997 Ford Taurus
It should be on the keyless entry control module behind the fuse box (below steering column) on the firewall. It's a five digit number 1xxxx.
The owner' manual list two possible locations of the 5-digit factory code. One, the code is on a card that came with the owner's manual packet. The second should be taped to the computer module.
Pull off the passenger side kick pannel and you will see a module that says something like keyless entry or security module. If you have this module you have keyless entry. This answer is based on my 2000 ranger with keyless entry. Mike B Orlando
It is the ignition switch, remote keyless entry receiver, tire pressure monitor computer, antitheft chipped key computer
I found the computer module (w/ the keyless entry factory code) on my 2003 Ford Explorer XLT behind and just below the rear passenger side seatbelt panel. Not sure if it's in the same location on the Sport model but it's worth a shot. Carefully remove the seatbelt panel (shoulder portion) and dislodge the top portion of the panel below it. The black computer module with the keyless entry code should be easily visible.
The powertrain control module (PCM) is visible in the engine compartment. It is in the firewall on the passenger side. The rap module for your keyless entry should be in the jack storage compartment ( at least it is on the 4 door)
The powertrain control module (PCM) is visible from the engine compartment on the firewall on the passenger side. The RAP module for your keyless entry should be in the jack storage compartment (at least it is on the 4 door)
The powertrain control module (PCM) is visible from the engine compartment. It is in the firewall on the passenger side. The rap module for your keyless entry should be in your jack storage compartment (at least it is on the 4 door)
THE KEYLESS ENTRY MODULE.
Where remote module in a 98 buick regal
The 1993 Ford Taurus ignition module is located behind the dashboard. The ignition module, can be found on the drivers side of the dashboard.