Under hood, driver side, upper engine area, mounted on end of engine block
That car does not use a maf sensor.
ON my 92 sundance the sensor is located on the side of the themostat housing. It also controls the cooling fan. If it quits, start the car let it warm up and unplug the sensor at the housing. If the fan comes on the sensor is bad.
A 1994 Plymouth Sundance/Duster does not use a speedometer cable. Instead, it uses a Speed Sensor located on the transmission.
Code 11 means no camshaft position sensor signal detected during engine crankingFix : Replace the camshaft sensor
Code 11 means no camshaft position sensor signal detected during engine cranking. Fix : Replace the Camshaft sensor
This car only uses the sensor in the distributor.
It is screwed into the exhaust manifold on the rear of the engine.
It doesn't have a crank sensor. It only has a distributor pick up plate (cam sensor).
The camshaft position sensor is on the driver side end of the cylinder head.
the TPS or throttle position sensor is located on the throtttle body which must be removed before replacing tps
The camshaft position sensor for the 3.0L V-6 engine is located in the distributor. Good Luck!
how do you replace the camshaft position sensor on a 1997 plymouth voyager 3l