Turn your steering wheel to the right all the way this will give you access to the passenger front wheel area.Looking straight in to the engine you will see a cover with 2 screws holding it on, one on top and one at bottom remove those screws and the sensor is behind this,I am not positive but I think it unplugs to replace it.I had mine done once by a mechanic then a friend showed me where it was located.Seems this is a common problem with 92 buicks. but as reading back on your question mine is a 6cyl. engine but may still be at same location.
If the crankshaft sensor is dead the engine will not start
The 1998 Montero Sport crankshaft sensor will be located on the rear of the engine. The crankshaft sensor is on the inside of the rear engine cover.
they did not start the crankshaft sensor till 1992
is the crankshaft position sensor the same and the engine speed sensor
The 1995 Mitsubishi Eclipse crankshaft position sensor is located on the back of the engine. The crankshaft position sensor will be near the bottom of the engine cover.
No, the 1983 model does not have a crankshaft position sensor. Only distributorless engine needs a crankshaft position sensor.
The location of the crankshaft position sensor depends on which engine the car has. If it is the 2.5L 4 cylinder engine the crankshaft position sensor is behind the ignition module. If it is the 2.8L V6 engine the crankshaft position sensor is on the side of the engine nearest the firewall and just above the pan rail in about the center of the block.
The crankshaft sensor for this model is located at the front of the engine, near the crankshaft itself.
the 92 4afe toyota engine does not have a crankshaft position sensor
where is the crankshaft sensor on a 1994 dodge pickup with a 5.9l engine?
Where is located the crankshaft sensor in Chevy avalanche 2002 engine 5.3?
The 2004 Chevy Malibu crankshaft position sensor location is dependent upon the type of engine. In most cases the crankshaft position sensor is on the back of the engine.
The 2001 Chevy Express Van crankshaft sensor will be on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.
The rear crankshaft sensor is located on the back of the crankshaft. The rear engine cover will need to be removed in order for the sensor to be visible.
behind the power steering pump on the passenger side of the engine
The crankshaft position sensor is located on the front of the engine. It is just to the left of the crankshaft pulley.
An intermittent crankshaft sensor will not let the engine fire the correct times. This can definitely cause a misfire for the engine.
crankshaft sensor is on the right rear corner drivers side of the engine.
The crankshaft position sensor, on your 1992 Buick regal 3.1 liter, is located on the back of the engine. The crankshaft position sensor is on the inside of the engine cover.
The 1994 Ford F1 50 crankshaft sensor is located on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
Pull the front cover off of it, Behind the Crankshaft balancer, The sensor is there. a diagram of how to install a creckshaft sensor.
The crankshaft sensor is located in the engine on a Chevy 1500 truck. This is under the hood.
It's located behind the crankshaft pulley bolted to the engine block.
A crankshaft sensor senses the engine revolutions to basically tells the the car when 2 inject and ignite the fuel