Dodge Dakota

Where is the diagnostic connector located on a 1990 dodge Dakota?

001

Top Answer
User Avatar
Wiki User
Answered
2014-11-20 10:12:00
2014-11-20 10:12:00

The obd port on a 1990 Dodge Dakota is under the hood, along the firewall..

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


Under the hood, along the pass side firewall.


There isn't. There are only diagnostic plugs on 94 and up


A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.


were id the data link connector for a 1995 dodge dakota


It is under the hood, on the firewall on the passenger side.


It is on the wiring harness under the hood on the passenger side of the firewall.


Passenger side fender in engine compartment. Black box with big connector on front.


A 1991 Dakota would have an OBD-I connector. It is on the passenger side of the firewall. It is roughly square on the outside.


A 1997 Dodge Dakota does not have an EGR Valve.


Were is the ecm located on a 2001 dakota


To my knowledge there should not be a diagnostic link on a 79'. most of the d100 trucks have a diagnostic port on the drivers side inner fender


diagnostic connecter 1995 dodge truckThe diagnostic trouble codes on all models can be extracted from the Powertrain Control Module (PCM) using the (OBD-1) scan tool. The connector is along the wiring harness under the hood, on the firewall on the passenger side.


The diagnostic connector is under the dash on the driver side.


The diagnostic connector is under the hood. It is located along the engine wiring harness.


There is no cabin filter on a 2004 Dodge Dakota.


The starter solenoid on a Dodge Dakota is built on the starter.


No, it is OBD1, the connector is under the hood, pass side.


The engine computer is the voltage regulator. Located on the inner fender.


The OBD (On-board diagnostic) port is under the driver's side dashboard, located roughly between the driver's feet if in the seat.


A 1991 Dakota would have an OBD-I connector. It is on the passenger side of the firewall. It is roughly square on the outside.A 1991 Dakota would have an OBD-I connector. It is on the passenger side of the firewall. It is roughly square on the outside.


The OBDII diagnostic plug is under the dash on the driver side.


under dash on driver side in center by brake


The diagnostic trouble codes on all models can be extracted from the Powertrain Control Module (PCM) using the (OBD-1) scan tool. The connector is along the wiring harness under the hood, on the firewall on the passenger side.


The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.


A 1995 Dakota is OBD 1 not 2. The connector is under the hood, pass side firewall.A 1995 Dakota is OBD 1 not 2. The connector is under the hood, pass side firewall.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.