The EGR valve for the 4.0 L OHV V6 engine is located on the driver's side of the engine - Helpfull
My Haynes repair manual states that the PCV valve on a 5.0 L V8 engine is located at the back of the intake manifold - Helpfull
.cv valves are located on top of your engines valve cover.
where is the iac valve for 2003 expedtion Eddie Bauer
Where is the EGR valve located on a 2000 Ford Explorer
In the 1988 Eddie Bauer version the proportioning valve is part of the brake's master cylinder. Follow the lead - I believe it's the same with the 1986'er...
I'm not a mechanic / technician but from drawings I was looking at for the 2007 Ford Explorer , 4.0 , SOHC , V6 engine ( it looks like the electrically heated PCV valve is located on the end of the drivers side engine valve cover , between the back end of the valve cover and the firewall )
no heat front defrost dsah.
Depending on the year and whether its an eddie bauer expedition or explorer, either on the passenger side just forward of the fuse box behind the kick panel or in the cargo area, drivers side in a small compartment about 3 inches above the floor of the cargo compartment six or so inches forward of the tailgate.
On a 1998 Ford Explorer, the EGR valve is located on the intake manifold. It is behind the throttle body.
A 1994 Ford Explorer ( up to the 1995 model year ) only came with one size of engine : ( the 4.0L / 245 cubic inch Over Head Valve , V6 engine ) * the 8th " character " of the VIN is an " X " *
pcv valve location on 98 ford explorer
In a 1992 Ford Explorer ( all models ) There was only ( 1 ) engine available from the factory The 4.0 liter Over Head Valve ( pushrod design ) V6 engine The 8th " character " of the VIN is an " X " ( as far as I know , 1991 to 1994 models had the same engine block )
The oil drain valve on a 2000 Ford Explorer Sport is located near the rear of the oil pan. The radiator drain petcock is located at the bottom the radiator.
It is located on the top of the left valve cover. there will be a hose with a 90 degree bend going into the valve cover.
on a v6 it is located on the backside of the left valve cover on a v8 it is on top of the left valve cover
On my 1995 the PCV valve is on the engine valve cover , on the driver side , near the rear of the valve cover
The air conditioning recharge valve on the 2003 Ford Explorer 4.6 is located on the low pressure side of the air conditioning system. Located on the line coming from the accumulator to the compressor is the recharge valve.
I'm not a mechanic / technician but on your 2004 Ford Explorer , 4.0L Single Over Head Cam V6 engine : I BELIEVE the electrically heated PCV valve is located at the rear of the drivers side engine valve cover ( between the valve cover and the firewall )
I'm not a mechanic / technician but I believe the ELECTRIC heated PCV valve on a 2004 Ford Explorer , 4.0 liter V6 engine is located : ON THE REAR of the drivers side engine valve cover between the valve cover and the firewall )
Need to know which one you are looking for or, what does this vacuum control valve control.
It is bolted onto the throttle body.
The EGR valve is located at the right rear corner of the intake manifold near the firewall you will have to remove the throttle body cover to access it
On the 4.0 L OHV engine, the EGR valve is located on the driver's side of the engine. how do i repair it
Not all Explorer engines had an EGR valve. If you have a 4.0, and it has an EGR, look on the driver's side of the engine, mounted to the upper intake manifold. It will be an aluminum colored metal or black plastic sensor, with one electrical connector and two hoses going to it. If you have a 5.0, it will be at the rear of the engine, mounted on the back of the throttle body.