The signal control is mounted in the steering column. It is an integrated unit, meaning that it also has the controls for the hazard flashers and cruise control (if you have cruise.) In order to access it, you will need to pull the steering wheel (moderate pain in the ass), and pull out the lower panel of the dash (slightly bigger PIA due to the close quarters.) The other catch is the e-brake cable, which is a drag to get off of the dash. Not all that hard, just time consuming. I replaced my signal control, and it took about 2 - 3 hours. I got the replacement from a junkyard for about $50. I had to buy the whole steering column, but it was a good deal any way you cut it! Get a good manual to help with this task, and PLEASE be careful with the airbag! It'll put a hurt on you if you trifle with it. Hope this helps - Mr. Dog
the flasher unit is directly behind the kick panel in the center (same panel that your cigarette lighter is in. it takes an Allen wrench and i believe a 8 mm socket to get to. you can interchange your emergency flasher and your turn signal unit to see if that is your problem. hope this answers your question. Mike
The light is made to flash with a plug-in flasher which is about an inch in diameter and and about an inch long. I should be located around the steering column about a foot from the floor. The actual turn signal device is located under the steering wheel. You must use a steering wheel puller to get to it.
Give me food and I will live give me water and I will die what am I?
What is 8 divided by 2(2 plus 2)?
What is pokediger1s password on roblox?
Who was Hillary Clintons running mate in the 2008 presidential elections?