The 2000 Kia Sportage signal flasher module can be found beneath the drivers side dashboard. The signal flasher module will be on the left-hand side of the brake pedal.
Usually part of the switch (module)
Maybe part of the hazard warning module
Flasher functions are part of the lighting module, there is no separate flasher.
Look under the dash right behind the console there is a small black box with a button in the middle of it.
The Turn Signal Flasher Module is located inside the Steering Column. Make sure you Disconnect the Battery as Airbag is right there on Steering Wheel! You can take off the Steering Column Covers by removing the 3 Screws from the Lower Steering Column Cover and then separating the Lower and Upper Covers, setting them off to the side. The Flasher Module is on top of the Steering Column behind the Mult Function Switch. To remove the Flasher Module, you have to Disconnect the Electrical Connector and Remove the Flasher Module from its Mounting Bracket.
If you are referring to the Turn Signal Flasher Module, it is located inside the Steering Column. Make sure you Disconnect the Battery as Airbag is right there on Steering Wheel! You can take off the Steering Column Covers by removing the 3 Screws from the Lower Steering Column Cover and then separating the Lower and Upper Covers, setting them off to the side. The Flasher Module is on top of the Steering Column behind the Mult Function Switch. To remove the Flasher Module, you have to Disconnect the Electrical Connector and Remove the Flasher Module from its Mounting Bracket.
Flasher is incorporated with Hazard module. Remove front of dash to replace
The Turn Signal Flasher Module is located inside the Steering Column. Make sure you Disconnect the Battery as Airbag is right there on Steering Wheel! You can take off the Steering Column Covers by removing the 3 Screws from the Lower Steering Column Cover and then separating the Lower and Upper Covers, setting them off to the side. The Flasher Module is on top of the Steering Column behind the Mult Function Switch. To remove the Flasher Module, you have to Disconnect the Electrical Connector and Remove the Flasher Module from its Mounting Bracket.
The flasher relay is more than likely defective. One flasher controls both the turn signals and the hazard lights. It is located on the driver side, behind dash, mounted above kick panel.
The newer GM vehicles incorporate the turn signal flasher with the hazard warning module
Bolted to the starter.
where is the ignition module located ina 2000 integra acura