Passenger side of vehicle up next to firewall.Type your answer here...
where is the ac recharge port on a 93 ford explorer located?
The ac is recharged through the low side ac port. Using the right type of Freon and the proper gauge for that type of Freon, connect the Freon to the port and fill to the proper gauge reading. Check the can for exact refill directions.
The Freon recharge port can be found on the top of the air conditioner compressor. There will be two ports. The recharge port will be labeled as the low pressure port.
I have a 2001, and the recharge port is on the passenger side, on the firewall. It's got a green cap on it and so far has been impossible to get to. Good luck.
You will need to connect your Freon bottle to the low pressure port on your 2002 Chevy Cavalier air conditioning compressor. Release the Freon into the compressor. A Freon recharge kit will come with everything you need and instructions.
You can put Freon into your air conditioning system through the low pressure port. The low pressure port can be found on the top of your air conditioning compressor.
Recharging the air conditioning is simple with a recharge kit. Connects the Freon bottle to the recharge port on the air conditioner compressor. Release the Freon into the compressor.
The Freon recharge port for a 95 Toyota Camry is located near the air conditioning compressor. It is near the fire wall, and has a black cap with an L marked on it.
You can recharge your 2003 Kia air conditioning system through the low pressure port. Connect your Freon bottle to the low pressure port. Release the Freon into the system.
DO NOT USE THE PORT DIRECTLY ON THE FIREWALL WITH THE GREEN CAP, THAT IS YOUR EVAP SERVICE PORT.which is emissions on the Ford... use the freon port that is on a metal tube in front of the port on the firewall. To locate it easily , lift Hood. Look on passenger side, right to the left of where your shock and strut bolts down.. putting freon in the green cap will destroy your vehicle.
Freon is added through the low side pressure port. A gauge will be needed to check that the system is not overfilled. The Freon and gauge can be bought together as a kit.
Connect the Freon bottle to the low pressure port on your air conditioning compressor. Release the Freon into the compressor. The purchase of a Freon recharge kit will make the process quite simple.