Chevy Camaro Z28

Where is the fuel filter located on a1996 Chevy Camaro z28?

123

Top Answer
User Avatar
Wiki User
Answered
2010-12-21 02:00:20
2010-12-21 02:00:20

It is mounted on the drivers side of the frame underneith the car back towards the rear end.

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


Its located in the right(driver) side under the exhaust manifold....


its located on exhaust manifold looks like a spark plug with awire on it.



where is located on a 1996 jaguar xj6 starter ?


NO. The bellhousing is different on the 1996 model only.


wher are the oxyegen sesors located on a1996 ford contour


6 qts if your asking for doing an oil and filter change


YES, they are both TBI. You will need to keep everything else with the original truck due to computer issues.


Should be listed on the oil cap and in your owner's manual. I think you will find it is 5w30.


It's called the IAT (Intake Air Temperature) sending unit. It is located in the tunnel housing of the intake between the filter and the throttle body. It will be a little switch with 2 or 3 wires running to it in the center or more centered towards the air filter.


If it is a automatic transmission then it will be a 4L80E. Sorry but I don't remember what kind of stright stick transmission it had.




controlled by computer --not adjustable


there should be a rear sway bar


On a 1996 Accord, the blower motor is located in the dash behind the glovebox. The door to the glovebox must be removed and the frame needs to be taken out of the dash to get to the blower motor.


The automatic is called a 46re. The manual is a nv4500.


why does oil come out of dipstick on a1996 12v commin


Inside the evaporator case which is behind the glovebox


Under the valve covers. Be very carful with the Valve cover gasket as they are also part of the wireing harness. Almost $100 each last time I checked.


No. This is a completely different transmission.


I have the "Haynes" maintenance book for Chevy S10's and it says for my 1995 (2.2L 4c engine) the spark plug gap needs to be 0.060 inch.My V6 1995 S10 (TBI) Label on radiator shroud says gap for plugs is .045.Answer 2For a1996 4.3L CPI (W) the spark plug gap is .045


My 93 is behind passenger side kick panel.


The fuel capacity of 1996 Mercedes e320 is 80 litres.




Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.