the fuel filter is located on driverside rear in front of the rear wheel.
The fuel filter for a 1986 Chevy G20 should be mounted on the frame under the van. The filter is an inline type and should be easy to change.
Under the power steering pump in front of the engine. It is not an easy one to change.
go to chuck's Chevy pages .com the answer should be there.
the fuel filter is located on the drivers side close to the fire wall, its white an looks like a little canster with to lines on it.
The 1986 Chevrolet C10 pickup truck fuel filter is located inside of the fuel tank. The fuel tank will need to be removed in order to change the fuel filter.
That would be the oil sending unit.
follow the upper radiator hose to the thermostat housing on engine. Thermostat is located under the thermostat housing.
8 to 10 degrees.
1986 S10 Blazer 4X4 with 2.8L, The oil sender is located just to the right side of the oil filter and is a pain to get to...
Which sending unit? Oil or temperature? Or ?????
1987 is the last year for a carburetor.
It doesn't have one.
You can't find it because they were NOT used in 1986
the fuel filter on a 1986 ford ranger is located on the inside of the frame on the drivers side in front of the gas tank.
It is in the throttle body.
the only way i could figure out how to get the starter out was to remove the right engine mount
They came with 31x10.50 R 15 Radial Tires.
With a 4-barrel carb. 155hp @ 4000 rpm
Did you replace the fuel filter?
there isn't one
Here's a link to the answers most are looking for. It's a brochure for the 1986 Blazer/Suburban/Jimmy's. Looks like 6000lbs for gasoline engines, less for diesel. http://www.coloradok5.com/brochures/1986/
It's located on the driver side of the motor, right below the oil filter. It is a brass looking thing.