On many of the voyagers, like my 1993 2.5L, it is on the underneath of the chassis, on the passenger side, about half way between the engine and the gas tank. You have to lay underneath the vehicle to see it. It's a canister about 3 inches long, with a black tube going into each end. It's held to the vehicle with one bolt. Very easy to change.
In a 1991 3.3l the oil pressure switch is located beside the oil filter
The flashed in a 1991 Plymouth voyager, is generally located in the driver's seat. They would normally drive round wearing a large over coat, and flash his penis at passers by.
Its located on the side of the transmission, real simple to replace.
i do not believe there is a thing on this vehicle
actually I broke the hood release latch on my 1991 Plymouth voyager, and I can't get the hood open, what can I do?
Yes, the automatic transmission filter is located inside the transmission pan.
A 1991 Chrysler Voyager can use ATF+3 or ATF +4.
there isn't one
No vacuum change at the MAP sensor.
on the frame rail underneath the passengers side just forward of the rear tire.
No I don't think so.
You can find wiring diagrams for this vehicle at www.autozone.com.
I believe its 40 ft lbs
Mopar ATF+3 or Mopar ATF+4
Plymouth does not use inertia/reset switches
full filter locatoin on a 1991 Cadillac Seville
Mine is located on the firewall.Looks like a oil filter an has fuel lines.1991 capri turbo.
i need to change my A/C filter in my car 300se 1991 model please can you located to me
When you want drop a lot of heavy loads and need to pull it out, just yank it out.
Where is the oil filter located on a 1991 toyota pickup
you will need a c-clamp and screwdriver and ratchett set.
No, the attachments are of a different shape and spacing
you should have fuel injection if this is the case either the injectors are bad or the circuit that controls the injectors are faulty