Top Answer
User Avatar
Wiki User
Answered 2011-09-13 10:45:43

On my 1988 Crown Vic, The fuel filter was located on the passenger side, right in front of the rear tire, tucked up on the frame

but the models of the '85 and '88 crown vic are different.

but i hope this helps you.

User Avatar

Your Answer

Still Have Questions?

Related Questions

Where is the relay for the fuel pump on a 1987 Crown Victoria LTD?

where is the fuel pump relay located on a 1987 ford ltd crown Victoria

1991 crown Victoria ltd fuel filter location?

You will find the fuel filter just forward of the drivers side rear wheel. It is mounted on the inside of the frame rail.

How do you replace fuel filter on 1984 ford ltd crown Victoria?

I would check on top of the intake manifold in front of the carburetor, at least that's where the fuel filter is on a 1984 LTD Brougham 3.8 liter carburetor engine.

When was Ford LTD Crown Victoria created?

Ford LTD Crown Victoria was created in 1983.

How do you replace the fuel line on an 87 crown Victoria LTD?

The fuel lines on your 1987 Ford Crown Victoria are held in place with a swivel nut on each end of the fuel line. Loosen the swivel nut to remove the fuel line. Reverse the process to install the new fuel line.

What is the mpg for a 1988 Crown Victoria ltd?


How do you change an oxygen sensor on a 1981 ford ltd crown Victoria?

The 1981 Ford Crown Victoria does not have an Oxygen sensor.

How much horsepower does a 1984 ltd Crown Victoria have?

About 140

Does a 1986 crown Victoria ltd have a sun roof?

It was optional

What type of fuel switch is in the kick panel of your 1985 ford crown Victoria ltd?

That would be an inertia switch. It shuts off the fuel pump in the event of an accident.

What should the fuel mileage be on a 1989 ford crown Victoria 5.0?

According to www . fuel economy . gov ( no spaces ) For a 1989 Ford LTD Crown Victoria with the 5.0 , V8 engine ( 15 city / 22 highway miles per U.S. gallon )

Does a 1985 ltd crown Victoria have a throttle body or a carburetor?

As far as I know both the 5.0 and 5.8 liter V8 engines in a ( 1985 ) LTD Crown Victoria have a carburetor ( starting with the 1986 model , the 5.0 liter V8 engine was fuel injected , but the 5.8 still used a carburetor )

Starter 1985 Crown Victoria ltd?

You can find the starter for the 1985 Lincoln Crown Victoria LTD online at places like Rock Auto. AutoZone also offers the starter for this vehicle.

91 ford ltd crown Victoria coil springs?


Where is the fuel intake on a 1989 ford ltd Crown Victoria?

The intake manifold is an air intake. There isn't something that you refer to as a fuel intake. Fuel is introduced to the cylinders directly at the intake valves by the fuel injectors.

Is your 1989 crown vic ltd 5.0 with carb or fuel inject?


1983 5.0 liter crown Victoria LTD fuel injected what to do when running out of gas?

Nothing. Put more gas in and crank the engine. The pump will take over.

Can you use an alternator from a 1989 Ford Bronco on a 1985 Ford Crown Victoria LTD?


Does an 1989 Crown Victoria LTD police car have a 351 engine?

yes. the 1989 Ford LTD Crown Victoria has a carbeurated 351. the biggest difference between the 351 Interceptor Engines and the 302 Windsors were the INterceptor was carbeurated not fueal injected.

How do you change oil on a 1988 LTD Crown Victoria LX?

First, you take the car to your garage, ask for an oil and filter change, watch, ask any questions, and now you know what to do.

How much does a 1993 ford ltd crown Victoria weigh?

Around 3700-3800 lbs

What does ltd XL on a 1989 crown Victoria mean?

The LTD part is just the name of the car, it doesn't mean anything special. Pre-1983, Ford called this car the "LTD." From 1983 to 1991 the name became the "LTD Crown Victoria." Then starting in 1992 it was just called the "Crown Victoria." If it is an LX model (not xl, I don't know what that means), the VIN code should include P74. That denotes that the car was the optioned-out version, not the base model and not a fleet model.

What size gas tank for a 1989 crown Victoria ltd?

According to my Chilton's Auto Repair Manual : A 1989 Ford Crown Victoria has a ( 20.0 U.S. gallon gas tank )

Where is the fuse box located on a 1988 ford crown vic?


Where is the thermostat located in a 1991 crown Victoria ltd?

In a 1991 Ford LTD Crown Victoria ( 5.0 / 302 and 5.8 / 351 ) Follow the top radiator hose from the radiator , it connects to a housing on the front of the intake manifold . The engine cooling thermostat is inside the housing

Still have questions?