hi, the fuel filter is located just under the brake fluid container next to the master cylinder. the filter is not expensive and is very easy to change, i know because i have done it to my 95 villager. you out...
standing in front of car looking at engine, it is on the right side on firewall. big silver cylinder with rubber line coming out of top and bottom. Walmart i think carries them.
You would have to be more specific regarding which filter you are talking about.
I looked at the Mercury Villager Owner Guides from ( 1996 , 1999 , and 2002 ) With engine oil filter change : Each Owner Guide shows ( 4.2 U.S. quarts )
Really? Unclip the cover and remove the old filter. It's easy.
According to the 2000 Mercury Villager Owner Guide : With engine oil filter change the 3.3 litre V6 engine takes : ( 4.0 litres / 4.2 US. quarts of 5W-30 engine oil )
without oil filter 3.7 quarts with oil filter 4.2 quarts
I assume it is the same as the ( 1996 ) Mercury Villager : With engine oil filter change : ( 4.2 US. quarts of 5W-30 engine oil )
A screwdriver and a 10mm socket wrench.
The filter is located behind the RH side of the carbon canister under the hood.
According to the ( 1996 ) Mercury Villager Owner Guide : With engine oil filter change : The 3.0L V6 engine takes ( 4.2 U.S. quarts / 5W-30 PREFERRED )
The same way you do on any other vehicle. Drain the oil, remove the filter, replace, refill.
Bottom front of engine.
4.3 with filter.
According to the 2001 Mercury Villager Owner Guide : For the 3.3 liter V6 engine : With engine oil filter change : ( 4.2 US. quarts of 5W-30 engine oil )
According to fordparts.com : For a 1995 Mercury Villager : Engine oil filter ( Motorcraft FL - 839 ) Engine air filter ( Motorcraft FA - 1121 ) Engine fuel filter ( Motorcraft FG - 978 )
A Villager, like most cars, has only one fuel filter.
According to the 1996 Mercury Villager Owner Guide : With engine oil filter change : The 3.0 liter V6 engine takes : ( 4.2 U.S. quarts / 4.0 liters , 5W-30 preferred )
4.2 U.S. quarts ( 4.0 liters ) with engine oil filter change , according to the Owner Guide
2000 mercury villager
According to the 1997 Mercury Villager Owner Guide ( and one of the Ford websites ) The 3.0 liter V6 engine takes the ( Motorcraft FL-839 ) engine oil filter
Under the vehicle, approximately in the middle, driver's side.
According to the 1997 Mercury Villager Owner Guide : With engine oil filter change the 3.0 liter V6 engine takes : ( 4.0 liters / 4.2 US. quarts of 5W-30 engine oil )
right above the oil filter on the transmission side of the filter mount
The fuel filter is located under the hood on the drivers side beneath the master cylinder
New spark plugs, spark plug wires, and a new air filter with higher air flow. Probably wouldn't hirt to change fuel filter too
Ask questions, submit answers, leave comments
Earn points for using the site
Customize your profile
Already have an account? Log in