There is no pressure outlet to check,you have to buy a fuel pressure gague kit or take it to a shop to have it checked. If you buy a kit you have to unhook the fuel inlet hose and fit it to the gauge to see what the pressure is reading.
The fuel pressure regulator is located on the fuel rail of the vehicle.
check the owners manual..should be doors and such..
WHERE IS THE FUSE BOX IN MY 929 MAZDA AND WHERE. HOW DOES THE ENGINE CHECK LIGHT LOOK AND LAST WHY IS IT ON AND STILL RUN
The fuel pressure regulator is located on the fuel rail of the vehicle. It should be on the head closest to the front of the vehicle.
UNDER HOOD, DRIVER SIDE, UPPER ENGINE AREA, ENGINE END OF UPPER RADIATOR HOSE, MOUNTED IN COOLANT OUTLET HOUSING
You can find a Mazda repair manual at just about any auto parts store or you can check at your local library to see if there is one available for checkout.
automatic has a dipstick under the hood. manual should have a plug on the side of it.
Check the rear light wires, could be a short
You can check fuel pressure by buying a fuel pressure master kit and remove the fuel line from the fuel rail with a size 17 socket and then install tool and crank.
because is reeving, there for it depends on the amount of pressure you apply to the gas
No, the 1993 Mazda Protege DX does not have an airbag. The vehicle does have a passive restraints system and is extremely reliable.
Follow + battery cable should connect to solenoid
For my Mazda I use 10w-30
There are two. one is in the fuel tank with the fuel pump, the second is at the fuel pressure regulator
Definitely take apart the gauges, check and make sure all cables are intact.
you will have to get from Mazda or buy a used one
it has one
It is important to know where the parts are within a car. The horn relay in a 1993 Mazda Protege is found in the cars fuse box.
most parts are yes. most parts are also interchangeable for ford probes of the same year range (excluding body parts of course --- Many interchangeable parts on 1993 Mazda Mx6: 1993-1996 Mazda 626 1993-1996 Ford Probe some parts off the Mazda MX3 some parts off the 1998-2003 Mazda Protege some parts with 1996 are not compatible due to OBDII legislature, which changed emissions and other changes.
if it POURS out, check drain plug, oil filter and oil pressure sending unit