Best Answer

The fuse is located on the drivers side kick panel. I believe it's a 7.5 Amp. Hope this helps.

2006-07-27 18:45:58
This answer is:
User Avatar

Your Answer


Related Questions

Who to call to fix circuit breaker?

An electrical contractor or electrician would definitely be competent to help with that repair. The handyman laws in some states allow a handyman to perform minor repairs such as replacing a circuit breaker. It's a simple process, you just have to make certain that you shut down the power so nobody gets electrocuted. Replacing a circuit breaker is not a minor repair, NFPA 70E - Standard for Electrical Safety in the Workplace as well as the National Electrical Code state that only a qualified person can do electrical work. A qualified person is "One who has skills and knowledge related to the construction and operation of the electrical equipment and installations and has received safety training to recognize and avoid the hazards involved."

Can a new breaker be bad?

Certainly. No manufacturing process is perfect.

What is called the process of bone replacing cartilage?


What are the process of replacing of cartilage to hard bone?


What is the name of the process used to connect electrical components to a circuit board?

The process of connecting electrical components to a circuit board is known as glueing, cementing, strapping, or bolting. The process of connecting components electrically to points in the circuit is known as soldering.

How would one replace a car inverter?

For powering a load over 150 watts, you can connect the inverter directly into your car battery. This involves using a 4-guage power cable that draws directly from the positive battery terminal. Without an in-line fuse or circuit breaker, you could short circuit the process.

What deference between vacuum circuitb reaker and sf6 breaker?

A vacuum circuit breaker has the circuit interrupting contacts inside a vacuum bottle. Without air the arc created by interrupting the circuit contains only material from the contacts. As a result the arc cannot sustain itself as well as it would if in air and the contacts will be able to handle higher currents. In an SF6 breaker the arc occurs in SF6 gas. SF6 captures free electrons from the arc quickly quenching it. In the process SF6 is broken apart but will recombine back into SF6. Some "SF6" breakers use vacuum bottles. This results in the small size of SF6 Switchgear with the advantages of vacuum breakers.

What is Beach Restoration?

Beach Restoration is a process of replacing sand.

The process of replacing other tissues with bone is called?


Where is the starter located on a 1995 Ford Escort?

Behind engine underneath intake plenum. See other wikianswer on the process of replacing the starter in the 1993 escort (same as 1995).

Where is the horn located under the hood on a 2000 Mitsubishi galant?

It is located behind the radiatior low on the drivers side of the car. Don't confuse it with the "alarm" horn above the front right tire. My horn just died, and I am in the process of replacing it.

How does a short circuit work?

A short circuit is an interruption in the design of a circuit. The short interferes with the flow of electricity causing feedback through the process.

What is the process of circuit design?

The circuit design process covers systems ranging from highly complex to simple. The design process for simple circuits can usually be completed by one person, while teams of designers may be required to complete the process for more complex circuits.

What is the process for evaluating expressions called?

An algebraic expression is a process for evaluating expressions. Replacing variables with numerals and following a standard order of operations is used for the process.

Are circuit breaker panels chosen by total amperage of all circuit breakers in the panel?

Most often if you add up all the breaker values in a panel they will exceed the rating of the panel. The theory is that you never operate each breaker to its full capacity. The panels are sized to the maximum current that is capable of being supplied by the electric company equipment servicing your house. Correction: Panels are sized according to the outcome of a complicated process of estimating the maximum number of amps that are likely to be used at any one time. This gives you a minimum size and you install AT A MINIMUM the next larger size panel. I don't know of a maximum size by code but there are limits to what can be practically used. In the absence of this complicated process, there are some rules of thumb that are substituted on houses. These range from 100 amps to 200 amps.

What is the process located at the bottom of the sternum?

The xiphoid process

Why is arthritis most common in elderly?

due to their ageing process calcium is replacing rapidly

The process of creating a current in a circuit by charging a magnetic field?


Where is speed sensor located for 90 Honda Prelude SI?

I am in the process of replacing the speed sensor in my 90 prelude. It is located on the transmission. with a small cable with a plug on the end of it. Looking at it from the passenger side . you can see a picture of it on eBay.. just type in 1990 Honda speed sensor.. there are several...

Where is the egr valve located on a Ford Ranger?

I am in the process of replacing my valve for my 2000 Ford Ranger. When I pop the hood it is back and to the right and has a couple of hoses attached to it. If you buy the part it is really easy to identify it with the replacement part.

What is the first step in the process of replacing a motherboard?

Verify that you have selected the right motherboard to install in the system

The first step in the process of replacing a motherboard?

Verify that you have selected the right motherboard to install in the system

The process of replacing repeated patterns of letters with a shorter placeholder is called?

It is called file compression.

What is the process of replacing repeated patterns of letters in a file with a shorter placeholder?

It is called file compression.

The process of replacing a defective gene with a healthy gene is called?

The process of replacing a defective gene with a healthy gene is called gene therapy. Gene therapy is done by cutting genes from the DNA of healthy cells and inserting them into the DNA of defective cells and tissues.