answersLogoWhite

0


Top Answer
User Avatar
Wiki User
Answered 2008-08-28 14:34:19

On a 1998 Ford F-150 , in the power distribution box in your engine compartment , fuse # 17 is a 30 amp maxi-fuse for the SHIFT on the FLY RELAY and TRANSFER CASE SHIFT RELAY ( Ford states to disconnect your battery before servicing anything in the PD BOX , which means your vehicle will have to relearn its idle , the clock and radio stations will have to be reset etc )

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still have questions?

Related Questions

Can ford f-150 4 wheel drive rims fit a ford- f150 2 wheel drive?

f150 can a4 wheel drive wheel fit on a 2 wheel drive f150 both 6 bolt pattern


Is the 2004 f150 rear wheel drive?

rear wheel drive or 4x4 capable


Is the 2004 F150 front wheel drive?

No , rear wheel drive or 4X4 capable


Is the 2006 ford f150 front wheel drive?

No , rear wheel or 4x4


How many lugs on a 2005 ford f150 two wheel drive?

( 6 ) per wheel


Is the 2007 f150 rear wheel drive?

A 2007 Ford F-150 is either rear wheel drive or 4x4 capable


Where is the ford f150 wheel speed sensor?

its located at the rear drive axle


What is curbweight of 1978 F150 6-cylinder rear wheel drive?

Heavy...


How long is the drive shaft for a 1986 Ford F150?

It depends on if it is two or four wheel drive, a 4x4 is 48 inches


How many lugs are on a 98 ford f150?

( 5 ) per wheel on a 1998 Ford F-150


How do you change wheel bearing on a 2011 ford f150?

2 or 4 wheel drive makes a big difference. Need more info.


Can you disconnect Ford F150 rear drive shaft and still drive vehicle?

no unless it is a 4 wheel drive and you are in 4 hi or lo. I still wouldn't do it


Will a 4x4 F250 transmission work in a 2 wheel drive F150?

The tailpiece on the 4x4 transmission allows the transfer case to be bolted to it The tail piece would have to be changed for a 2 wheel drive vehicle


What is min cutting spec for rear rotor on Ford 2006 F150?

Two wheel drive is 18.5mm minimum thickness. If not two wheel drive you can pull the rotors off and they will have the min stamped right there on the rotor.


The firing order for a 2006 v6 f150 2 wheel drive?

1 - 4 - 2 - 5 - 3 - 6


What is the part number for a PCV valve for a 1991 ford f150 6 cylinder engine?

www.motorcraft.com shows : For a 1991 F150 with 4.9 L ( 300 cubic inch ) straight 6 cylinder engine Motorcraft part # EV111 for 2 wheel drive Motorcraft part # EV118 for 4 wheel drive


How much does a F150 xlt long bed rear whell drive?

The price of a Ford F150 XLT Long Bed with Rear Wheel Drive will vary depending on the year of the truck. A brand new truck with this features is roughly around $41,000.


How do I replace the Block Heater 1998 F150 4.6L?

How do I replace the block heater in my 1998 F150 4.6L?


How hard is it to replace a catalytic converter on a f150 v6 2 wheel drive?

Let a professional do this. You save very little by DIY.


Can a 1990 F150 four wheel drive have a manual transmission?

Yes.. I Have a 1990 F-150 4X4 and it is a 5-Speed Manual Transmission


How do i replace the front Brake rotor Ford f150?

You will have to know the year, model and if it's 2 wheel drive or 4 wheel drive.You will need a Haynes/Chilton type work manual because it can get involved. And with a manual you have the information at your finger tips.


What is the wheel lug nut torque specifications for a 2003 F150 four wheel drive?

Check owner's manual. If you don't have one copy and paste link below; www.fleet.ford.com/maintenance/owners_manuals


Will rims from 1996 f150 fit on 1998 f150?

No, 97-03 F150's have a 5x135 lug pattern.


What is torque spec. for 79 Ford F150 4 wheel drive front wheel bearing?

Go to Ford Muscle.com and scroll down to the trucks section and ask your question there. Good Luck.


What is the length of the 1998 ford f 150 long bed?

On a 1998 Ford F-150 : I believe the regular cab , long wheel base is ( 220.8 inches long ) and the SuperCab , long wheel base is ( 240.9 inches long ) The bed on a 1998 Ford F150 long bed is 8' in length.