Ford Taurus
Heater Cores and Blower Fans
Pontiac Trans Am
Ford Expedition XLT

Where is the heater core valve located on a 1997 Pontiac trans-am?


Top Answer
User Avatar
Wiki User
2010-02-06 01:39:40
2010-02-06 01:39:40

Probably in the 1997 Pontiac trans-am heater core valve holder. If not, you probably lost it. Both the valve, and your mind.

User Avatar

Related Questions

The heater control valve on your Pontiac Grand Prix is located behind the kick plate, on the passenger side of the passenger compartment. The heater control valve is near the heater core box.

The heater valve is located inside the heater box.

It does not have a heater control valve.It does not have a heater control valve.

on a 1998 Pontiac gan am ,they do not have a pcv valve.

Pontiac PVC Valve is located on the Driver's side rear valve cover.

heater control valve located on 2001 gmc jimmy 4.3l

The heater control valve in a Mustang is located within the engine. It is right in the heater's core and where the coolant is located.

where is the heater control valve for a 1997 ford expedition

where is valve cover located on a 2001 Pontiac Grand-Am 4 cyl

The 2003 Pontiac Montana EGR valve is located on the firewall. The valve will be on the driver side of the firewall.

The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.

The EGR valve is located on the side of the intake on the 2000 Pontiac Grand Am. It is close to the intake manifold.

location of heater control valve on 2005 mercury marguis ?

If you are looking for a valve in the heater hoses that restricts coolant flow, it does not have one.

The heater valve is located behind the dash above and to the right of the accelerator pedal. The heater core is right beside it. It is operated by a linkage to the slider on the heater control panel.

The PCV valve is located under the MAP sensor on a 1990 Pontiac Grand Prix. The MAP sensor is in the upper plenum.

There isn't a heater valve. The temperature is controlled by airflow doors inside the dash.

How to install a heater core on a 1999 dodge Durango?

A 2000 Chrysler 300m does not have a heater valve. The cabin temperature is controlled by airflow doors.

The heater control valve (temp blend door) is located behind the dash assembly. The dash assembly has to come out to gain access to it.

You can find the PCV valve beneath the MAP sensor located in the plenum at the right front of the engine.

located about 12 inches right of oil fill cap.attached to front valve cover.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.