The Refrigerant Pressure Sensor / Switch will be located just to the left of the alternator pulley on the firewall....
There is no fuse for the compressor itself, if the compressor is not working, the low pressure switch has activated and there is not enough refrigerant in the system. Have your AC system serviced by a good shop or your local Chrysler dealer.
A 1996 Chrysler Town and Country does not have a kill switch.
It is just above and to the side of the oil filter.
It is called an oil pressure sensor socket.
P1789-OD/2-4 HYDRAULIC PRESSURE SWITCH CIRCUIT
follow the refridgerant lines from the compressor.
An air compressor pressure switch can be bought at your local electronics store, such as Best Buy. An agent would be happy to direct you to a purchase.
Pressure switch on a 2005 Chrysler 300 C can be changed by removing the wires from the switch. Remove the retaining nut. Reverse the process to install the new switch.
To unplug the oil pressure switch for a 1999 Chrysler Sebring 2.5, simply remove the connector from the back of the switch. With the switch unplugged, the computer will think the engine has low oil pressure.
It's not a switch. The high pressure runs from the compressor outlet to the orifice tube inlet, and the low pressure side runs from the orifice tube outlet to the compressor inlet.
pressure switch located on the accumulator
Engages and disengages the compressor clutch as needed.