It uses a manifold absolute pressure sensor.It uses a manifold absolute pressure sensor.
This is the Manifold Absolute Pressure sensor. It is located on the top of the motor between the fire wall and the intake manifold case.
It's the MAP sensor...Manifold Absolute Pressure.
It does not use a MAF. It has a MAP sensor (manifold absolute pressure) on the front of the intake manifold.
The Manifold Absolute Pressure (MAP) sensor is located near the throttle body on the intake manifold.
a map sensor is a manifold absolute pressure sensor.
the map sensor is located on the air intake manifold on the left side under the throttle position sensor on the 2.2 4 cyl. motor.
The Manifold absolute pressure sensor on a fiero V6 is mounted on the passenger side manifold right beside the thermostat assembly/water outlet
The manifold absolute pressure (MAP) sensor is an important component to your 1994 General Motors Blazer/Jimmy's EFI system. This pressure sensor is located provisioned into the intake manifold assembly.
The Manifold Absolute Pressure sensor is located to the rear of the engine well, slightly on the left hand side. It is on top of the intake manifold.
The 2011 sonata does not have a maf it has a map sensor or manifold absolute pressure sensor located on intake manifold near throttle body assy.
Not enough info. Need to know the year, make, model and engine.
The manifold absolute pressure (MAPO) sensor monitors the air pressure as an important input to the vehicle's EFI system. On this application the MAP is bolted to the intake manifold, from where it gets its pressure readings.
The Manifold Absolute Pressure (MAP) sensor is located on the firewall side of the upper intake manifold plenum
Manifold Absolute Pressure Sensor ( MAP )
the map sensor is located behind the alternator by the plenum, above the the pcv valve
map stands for manifold absolute pressure it records manifold pressure and adjusts fuel and timing acordingly. it should be located on the firewall. hope this helps.
Manifold Absolute Pressure/Barometric Pressure Sensor
Manifold Absolute pressure measures the change in manifold pressures. It is an input or data gathering sensor that the computer uses for management.
It does not have a MAF, it uses a manifold absolute pressure (map) sensor. Which is bolted to the front of the throttle body.It does not have a MAF, it uses a manifold absolute pressure (map) sensor. Which is bolted to the front of the throttle body.
It does not have a MAF, it uses a MAP (manifold absolute pressure) sensor.
No map sensor is manifold absolute pressure sensor and tps throttle position sensor
The MAP (manifold absolute pressure) sensor monitors the intake manifold pressure changes and adjusts the fuel delivery based on its reading
The Manifold ?æAbsolute Pressure sensor is located on top of the manifold. It is just forward of the intake manifold and held in place with a bracket assembly.
The MAP (Manifold Absolute Pressure) Sensor on a 2000 Chevy Suburban is located on the very top of the motor. It is all the way to the back of the motor. There is nothing behind it.