The multifunction switch is the turn signal switch and whatever else is part of it.
Turn signal headlamp switch
Should be on the back side of the multi-function switch. Remove the upper shroud and it will be the little black box to the right of the emergency flasher button. Push it towards the front of the car and it will slide out. Anon
what is the function of the switch ? and what does it do ?
turnsignal/wiper switch
Internal to multi-function switch. Multi-function switch is mounted with two bolts. This will be a 5 minute repair.
A failing turn signal/wiper multi function switch is a common cause.
Your multi function switch is mounted inside your steering column cover The turn signal lever is part of the multi function switch , as is the hazard flasher switch - these are visible outside of the steering column cover Your turn signal lever / multi function switch operates : - turn signals - high beams - flash to pass - windshield wipers - windshield washer
The multi function switch is inside the steering column , for turn signals etc.
It is the turn signal/wiper switch
You can use whatever you want, but Chrysler only recommends 5w20 so the multi displacement system can function properly.You can use whatever you want, but Chrysler only recommends 5w20 so the multi displacement system can function properly.
I am assuming the "multi-function" switch is the TURN SIGNAL/HI-LO BEAM/WIPER CONTROL SWITCH. It is located on the left side of the steering column.
The term "multi-function switch" on a vehicle usually refers to the stick (or sticks) on the steering column that controls turn signals, wipers, cruise control, etc.