answersLogoWhite
Dodge Ram
Jeep Cherokee Sport
Toyota Corolla

Where is the neutral safety switch on a 93 Toyota Corolla and how do you replace one?

575859

Top Answer
User Avatar
Wiki User
2006-02-17 03:12:16
2006-02-17 03:12:16

it is located at the top of the clutch pedal it. it is removed by losening a nut and disconnecting the harness and it should just pull out

1

Related Questions

User Avatar

Though I don't drive this type of car, I do know that most neutral safety switches are found on the transmission.

User Avatar

The 2013 model of the Toyota Corolla has a good overall safety rating. It is not the safest car on the road but for a price it is a nice choice.

User Avatar

where is the neutral safety on my 1987 4runner

User Avatar

How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?

User Avatar

Where is the neutral safety switch on a 1994 Nissan Altima?

User Avatar

Put it in gear and try to start the car. Then put it in either park or neutral and try to start it.Cranks in gear or doesn't crank in park/neutral: switch is bad.Doesn't crank in gear but cranks in park/neutral: switch is good.

User Avatar

The neutral safety switch on a 2002 Toyota Camry can be found in the driver side footwell. A neutral safety switch prevents a standard car from starting without having to press in the clutch and are mounted behind the clutch pedal.

User Avatar

the neutral safety switch can be found by following the clutch pedal up into the bottom of the dash. its usually one or two 10mm bolts, and a connector. super simple to replace, it'll be the ONLY electronic piece connected to the clutch pedal

User Avatar

Begin by removing the wiring from the 2002 Chevy Cavalier neutral safety switch. Remove the neutral safety switch retaining screws. Reverse the process to install your new neutral safety switch.

User Avatar

The neutral safety switch, on your 1999 Chevy Tahoe, simply plugs in. Unplug the neutral safety switch and replace it with a new one.

User Avatar

on a 2oo7 model its located on the transmission.

User Avatar

Neutral safety switch is on the left side of the transmission. Should onlt take 30 minutes to replace.

User Avatar

The neutral safety switch is located on the side of the transmission at the linkage connection. Unhook the wiring connector, Disconnect the linkage, then unbolt the switch to replace it.

User Avatar

its on the drivers side of the gear box

User Avatar

The neutral safety switch is either not adjusted properly or is defective

User Avatar

I cannot give you a detailed answer, but I can tell you the neutral safety switch is in the steering column, associated with the shifter, and is not in the transmission.

User Avatar

It is located on the passenger side of the transmission.

User Avatar

Might have child's safety lock on.Read the users manual if you have it.

User Avatar

The neutral safety switch and backup light switch are one in the same. You have to replace it. It is located on the transmission where the shifter connects to it.

User Avatar

1.even though it may be in park it may not be passed the neutral safety switch. next time that happens try putting it in neutral and that might bypass that switch. 2.Last time I had this problem on my 1996 Corolla, it turned out that the battery connection to the starter below was loose. Tightened the nut and all is well for past 2 years.

User Avatar

how to replace the netural saftey switch

User Avatar

go to www.naxja.org or www.jeepforum.com and do a search for "neutral safety switch. There will be links to jeep owners sites that have detailed instructions

User Avatar

The neutral safety switch is bolted on the side of the transmission. Remove the screws, disconnect the wiring connector, then install the new one.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.