You can find it in the exhaust manifold, it's visible from the engine compartment. Basically it's between the engine radiator.
Where are the Bank 1 Sensor 1 oxygen sensor on a 1998 ford explorer?
Sensor 2 is the downstream sensor (after the catalytic converter). Bank 1 is the drivers side of the engine
Bank 1 is the passenger side of the engine Sensor 2 is after the catalytic converter ( downstream )
where is the oxygen sensor location on a 1998 explorer bank 2 sensor
The wiring for the oxygen sensor PLUG is what I forgot to submit.
The 1998 Toyota Avalon oxygen sensor fuse can be found in the fuse box. The oxygen sensor fuse will be the number 17 fuse.
There is no such thing as an oxygen speed sensor.
The 1998 Pathfinder right rear oxygen sensor can be found in the cargo compartment. The oxygen sensor will be beneath the cargo floor, where the spare tire is housed.
NO They are not the same.
It depends on which o2 sensor.
the oxygen sensor is on the exhaust manifold directly in front of the fan. there is one above and below the manifold.
In a 1998 Jeep Wrangler, the oxygen sensor is located in the exhaust pipe. It can be found just below the junction of the exhaust manifold and the exhaust pipe.
Where is the engine oil cooler on a 1998 Ford Econoline van E150
There are 4 in the exhaust system.
All oxygen sensors are located in the exhaust system.
my motor light is on my 1998 e320
It screwed in to the exhaust manifold. To change it you unplug the sensor and unscrew it with an O2 sensor socket.
In the ex pipe close to the manifold.
You can not bypass it. The oxygen sensors are required for a proper running engine.
You can find it in the exhaust manifold. There is only one sensor over there. Sometimes the sensor is called oxygen sensor because on some Camry models at the same location the oxygen sensor is installed. Most of camries have oxygen sensor.
An auto xray scanner can determine if a O2 sensor is bad.
It"s located on the rear manifold, between the firewall and the engine for the upper oxygen sensor(b1s1), and between the catalyst converter and the resonator for the second oxygen sensor (b1s2), between the pipe and the floor.